PRODUCTION DOWNHOLE AND SUBSURFACE EQUIPMENTS

Memahami prinsip dasar penggunaan peralatan sumur produksi di atas maupun di bawah permukaan untuk lapangan migas

Bandung | 31 Agustus – 02 September 2020 | Rp 7.950.000/ peserta
Bandung | 14 – 16 Oktober 2020 | Rp 7.950.000/ peserta 
Bandung | 11 – 13 November 2020 | Rp 7.950.000/ peserta

Jadwal Training 2020 Selanjutnya …

 

 

OBJEKTIF TRAINING PRODUCTION DOWNHOLE AND SUBSURFACE EQUIPMENTS

Setelah menyelesaikan training ini diharapkan peserta dapat:

1. Memahami prinsip-prinsip dasar penggunaan peralatan sumur produksi di atas maupun di bawah permukaan, untuk lapangan-lapangan minyak dan gas bumi.
2. Melakukan diagnosis sederhana dalam menagani problema produksi di lapangan yang disebabkan oleh reservoir atau fasilitas produksinya.
3. Melakukan perhitungan-perhitungan kuantitatip sederhana untuk gas lift, ESP, Hydraulic/Jet Pump, Sucker Rod Pump dan PCP.
4. Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perancangan dan perancangan ulang separator, gas scrubber, gas dehydrator dan peralatan produksi lainnya.

 

PRE-REQUISITE 

Latar belakang: Operator/ Sr. Operator/ Jr. Engineer/Non Engineer

 

MATERI TRAINING PRODUCTION DOWNHOLE AND SUBSURFACE EQUIPMENTS

1. • Exploration
   • Exploitation
   • Reserve Calculation
2. Basic Production Engineering
   • Inflow Performance Relationship
   • Productivity Index
   • Multiphase Flow
3. Well Completion System
   • Open Hole Completion
   • Single Completion
   • Commingle Completion
   • Multiple Completion
4. Downhole Equipments
   • Tubular Device
   • Packer System
   • Circulating Device
   • Nipples
   • Joints
5. Artificial Lift Method Equipments and Design
   • Gas Lift
   • Submersible Pump
   • Sucker Rod Pump
   • Hydraulic Pump

 

INSTRUKTUR TRAINING

Dr.Ir. Sudjati Rachmat, DEA. and Team

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

 

TRAINING VENUE 

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

DURASI TRAINING   

3 hari

 

JADWAL TRAINING 2020

1. 31 Agust 2020-02 Sep 2020
2. 14 Okt 2020-16 Okt 2020
3. 11 Nop 2020-13 Nop 2020
4. 30 Nop 2020-02 Des 2020

 

INVESTATION PRICE/ PERSON

1. Rp. 7.950.000/ person (full fare) or
2. Rp. 7.750.000/ person (early bird, payment 1 week before training) or
3. Rp. 7.500.000/ person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with Full AC facilities and multimedia
9. Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

PRODUCTION DOWNHOLE AND SUBSURFACE EQUIPMENTS

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days