THERMAL SPRAY COATING

THERMAL SPRAY COATING

Bandung | 21 – 24 Januari 2019 | Rp 8.500.000/ peserta
Bandung | 18 – 21 Februari 2019 | Rp 8.500.000/ peserta 
Bandung | 18 – 21 Maret 2019 | Rp 8.500.000/ peserta
Bandung | 22 – 25 April 2019 | Rp 8.500.000/ peserta 

Jadwal Training 2019 Selanjutnya …

 

 

INTRODUCTION AND GOAL

Thermal spraying is a group of processes wherein a feedstock material is heated and propelled as individual particles or droplets onto a surface. The thermal spray gun generates the necessary heat by using combustible gases or an electric arc. As the materials are heated, they are changed to a plastic or molten state and are confined and accelerated by a compressed gas stream to the substrate. The particles strike the substrate, flatten, and form thin platelets (splats) that conform and adhere to the irregularities of the prepared substrate and to each other. As the sprayed particles impinge upon the surface, they cool and build up, splat by splat, into a laminar structure forming the thermal spray coating.

Thermal spray coating is a well-established coating technique comparing with other coating processes. The advantages of thermal spray coating comparing with hard chrome, physical vapour deposition (PVD), chemical vapour deposition (CVD) are:

• high deposition rate
• low heat input process
• proven technology
• variety of coating materials
• high degree of repeatability
• resource of utilization
• favorable economics

Thermal spray technology and coatings solve critical problems in demanding environments. They provide “solutions” to problems involving repair, wear, high temperature and aqueous corrosion, and thermal protection. Thermal spray can also be used to manufacture net-shapes, advanced sensors and materials for the biomedical and energy/environmental sectors. These and other emerging applications take advantage of the rapid and cost-effective capabilities of thermal spray technology in the OEM and repair industries.

The thermal spray coating technology has been used in various industry ranges from aerospace to electronic industry and the utilization of this technology is growing fast in the industrial country. The market of thermal spray coating in Indonesia is widely opened, but there still few utilization from the industry and thermal spray workshop due to the limitation of technology and equipment.

This course :

(i) provides a thorough grounding and understanding of thermal spray processes, (ii) presents the complex scientific concepts in terms of simple physical models, and (iii) integrates this knowledge to practical applications and accepted thermal spray practices.

 

THERMAL SPRAY COATING TRAINING OUTLINE

1. What is Thermal Spray Coating (an introduction)
   • 1.1.  Definition
   • 1.2.  History
   • 1.3.  Coating Build-Up
   • 1.4.  Market Segmentation
2. Pre-Spray Treatment
   • 2.1.  Introduction
   • 2.2.  Surface Cleaning
   • 2.3.  Substrate Shaping
   • 2.4.  Surface Activation
   • 2.5.  Masking
3. Thermal Spraying Techniques
   • 3.1.  Introduction
   • 3.2.  Flame Spraying
   • 3.3.  Atmospheric Plasma Spraying
   • 3.4.  Arc Spraying
   • 3.5.  Detonation Gun Spraying
   • 3.6.  High Velocity Oxy Fuel Spraying
   • 3.7.  Vacuum Plasma Spraying
4. Material Used for Spraying
   • 4.1.  Method of Powders Production
   • 4.2.  Method of Powders Characterization
   • 4.3.  Spray Drying
   • 4.4.  Cladding
   • 4.5.  Mechanical Alloying
   • 4.6.  Self Propagating High Temperature Synthesis
5. Post Spray Treatment
   • 5.1.  Heat Treatment
   • 5.2.  Impregnation
   • 5.3.  Finishing
6. Method of Coating Characterization
   • 6.1.  Method of Microstructure Characterization
   • 6.2.  Mechanical Properties of Coating
   • 6.3.  Physical Properties of Coating
   • 6.4.  Chemical Properties of Coating
7. Properties of Coating
   • 7.1.  Mechanical Properties
   • 7.2.  Thermophysical Properties
   • 7.3.  Electric Properties
   • 7.4.  Magnetic Properties
   • 7.5.  Optical Properties
   • 7.6.  Corrosion Resistance
8. Application of Coating
   • 8.1.  Corrosion Protection
   • 8.2.  Iron and Steel Industries
   • 8.3.  Energy Generation and Transport
   • 8.4.  Non Ferrous Metal Industries
   • 8.5.  Paper Industries
9. Safety and Hazardous

 

INSTRUCTOR

Dr.Eng. Budi Prawara (Peneliti dan Praktisi LIPI bidang heat treatment and thermal spray coating)

Dr. Eng. Budi Prawarais graduated from Material Engineering (Thermal Spray Coating) University of the Ryukyus Japan for his Doctorate program. He work as researcher at research center of electric power and mechatronics – LIPI (Lembaga Ilmu Pengetahuan Indonesia) and his structural position is as head of Subdivision of mechatronic facilities. His core expertise is material engineering and surface engineering(rekayasa permukaan).  Related to training, Dr. Eng. Budi Prawara has taught  training class on topics related to Thermal Spray Coating, including heat treatment. As researcher he has researched numerous number such as Heat treatment to steel AISI H13 with process of Austempering, Tempering and Martempering, Defect influence at Thermal Spray Coating to Thermal Properties, heat treatment of Thermal Spray Coating with process of Spark Plasma Sintering, Deposition of Ceramic Matrix Composite Coating with HVOF Thermal Spray Coating for worn out and impact resistance application, Heat Treatment of Ni-Base Self Flux Alloy (SFA) Coatings by Spark Plasma Sintering, Station Charging System for electric Motor, designing of Cooling System at Dies High Pressure Die Casting/HPDC, designing of Thermal Spray Coating with High Velocity Oxygen Fuel (HVOF) System, designing of Dies HPDC at otomotive component, etc., and he has published its to academics media/journal and has spoken at seminars or conferences in Indonesia and abroad.

 

VENUE

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION

4 days

 

JADWAL TRAINING 2019

1. 21 Jan 2019-24 Jan 2019
2. 18 Feb 2019-21 Feb 2019
3. 18 Mar 2019-21 Mar 2019
4. 22 Apr 2019-25 Apr 2019
5. 13 Mei 2019-16 Mei 2019
6. 17 Jun 2019-20 Jun 2019
7. 08 Jul 2019-11 Jul 2019
8. 19 Agust 2019-22 Agust 2019
9. 16 Sep 2019-19 Sep 2019
10. 07 Okt 2019-10 Okt 2019
11. 18 Nop 2019-21 Nop 2019
12. 02 Des 2019-05 Des 2019

 

INVESTATION PRICE/PERSON :

1. Rp 8.500.000/person (full fare)  or
2. Rp 8.250.000/person (early bird, payment 1 week before training)  or
3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module
2. Training CD Contains Training Material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or Waistcoat or T-Shirt
6. Bag or Backpackers
7. Training Photo
8. Training Room with Full AC Facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified and experienced instructor
11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days