BEARING LUBRICATION

Mechanical, Preventive, Yogyakarta / By

BEARING LUBRICATION

Wisma MM UGM, Yogyakarta | 24 – 26 Oct 2011  | Rp. 7.500.000 per Peserta





DESCRIPTION & OBJECTIVES

This course covers real-world bearing lubrication in a dynamic, skills-based learning approach. Upon course completion, students will have learned the skills needed to choose, apply and maintain lubricants in bearing applications plant wide.
Upon completion this course,

  • Participant will be able to evaluate and select appropriate lubricants for a wide variety of rolling element bearing applications. For greased applications, this includes choosing an appropriate grease base, stiffness, base oil and additives, if needed, for proper operation.
  • The participant will also be able to compute grease intervals and re lubrication amounts for a variety of application conditions, such as contamination, high or low temperatures and vibration.
  • For oil lubricated applications, the participant will be able to choose the correct oil viscosity, delivery method (standing oil, circulating oil, air/oil, oil mist) and oil change out intervals.
  • The participant will be to evaluate filter effectiveness, and to select and apply appropriate filter(s).
  • The participant will be able to troubleshoot common lubrication problems and recommend corrective actions.



COURSE CONTENT

Lubrication fundamentals

  • Functions of lubrication
  • Basic expressions
  • Lubricant additives and their effects
  • Avoiding surface damage in bearings

Grease lubrication

  • Grease functions and properties
  • Grease delivery and metering systems
  • Selection of grease type: choosing the right grade, base, and oil for you application

Oil lubrication

  • Choosing the right lubricant: oil and grease quality standards and testing
  • Effects of cleanliness and contamination
  • Using bearings new life theory to predict effects of contamination
  • Effects of water ingress
  • Effective use of filtration, choosing the right filter
  • Change out intervals
  • Bearing housing design concepts
  • Comparison of oil delivery methods: static, wick-feed, lifting rings, circulating oil, mist, air-oil, oil spot
  • Determining oil flow rates

Applying lubricants

  • Determining lubrication quantities and intervals
  • Hands-on lubrication and lubrication procedures for pillow blocks, ball bearings, roller bearings, sealed and shielded bearings
  • Electric Motor lubrication

Common error

  • Over greasing, under greasing, mixing greases



METODH

Presentation, discussion, case study, and evaluation



WHO SHOULD ATTEND

Maintenance personnel and engineers responsible for bearing lubrication, lubricant specification and lubrication system planning and design.



INSTRUCTOR

  • Ir. Rini Dharmastiti, MSc. PhD.& TEAM
  • (Expert in bearing lubrication)



TIME & VENUE

  • Program pelatihan akan dilaksanakan pada tanggal 24 – 26 Oct 2011
  • at Wisma MM UGM, Yogyakarta



INVESTASI

  • Training Fee: Rp. 7.500.000,- / peserta ( non residensial )
  • Special Rate: Rp.7.000.000,-/peserta (non residensial) untuk pengiriman minimal 3 orang peserta dari perusahaan yang sama.

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  4. (required)
  5. PERSONAL DATA
  6. (required)
  7. (required)
  8. (required)
  10. (valid email required)
  11. (required)
  12. (required)
  16. PRE REGISTRATION DATA (Tidak Mengikat)
  20. (required)
  23. MESSAGE FOR TRAINING PROVIDER
  26. Captcha
 

cforms contact form by delicious:days

Related Training:

  1. Wanita Karir dan Perannya di Perusahaan dan Keluarga Training ini merupakan bentuk pengendalian diri seorang wanita karir agar tetap menyeimbangkan tugasnya...
  2. BEARING TECHNOLOGY AND ENGINE LUBRICATION SYSTEM BEARING TECHNOLOGY AND ENGINE LUBRICATION SYSTEM Melia Purosani Hotel, Yogyakarta |04 – 06 Oktober 2011  | Rp 7.500.000,-/peserta non residential LATAR BELAKANG : Bearing adalah komponen mesin yang mendukung dan memposisikan rotor...
  3. TEKNIK PEMELIHARAAN KENDARAAN Pelatihan Pemeliharaan kendaraan ini meliputi pemahaman mengoperasikan, merawat & memecahkan masalah pada kendaraan ...
  4. ELECTRIC SUBMERSIBLE PUMP ELECTRIC SUBMERSIBLE PUMP Bali | 17 – 19 Juni 2014 | Rp. 8.000.000  Bandung |  17 – 19 Juni 2014  | Rp. 7.500.000  Yogyakarta |  17 – 19 Juni 2014 | Rp.  6.000.000  Bali | 25 – 27 Juni 2014 | Rp. 8.000.000  Bandung | 25 –...
  5. Gearbox Technology: Design, Analysis, Testing, Maintenance, Lubrication,and Failure Gearbox Technology: Design, Analysis, Testing, Maintenance, Lubrication, and Failure Bali | 01 – 03 Oktober 2014 | IDR 8.000.000 Bandung / Yogyakarta | 01 – 03 Oktober 2014 | IDR...
  6. Sistem Hidrolik dan Pneumatik – YOGYAKARTA (Almost Running) Sistem Hidrolik dan Pneumatik – YOGYAKARTA Ibis Hotel, Yogyakarta | 6 – 8 November 2012 | IDR 6.000.000,-   TUJUAN Memberikan pengertian dasar tentang mekanika fluida yang berkaitan dengan sistem hidrolik dan...
  7. VARIABLE SPEED DRIVES ( VSD ) VARIABLE SPEED DRIVES (VSD) Yogyakarta | 04 – 06 September 2012 | Rp 7.000.000,-/participant Yogyakarta | 18 – 20 September 2012 |  Rp 7.000.000,-/participant Yogyakarta | 9 – 11 Oktober 2012 | Rp 7.000.000,-/participant Yogyakarta |...
  8. BEARING TECHNOLOGY AND ENGINE LUBRICATION SYSTEM BEARING TECHNOLOGY AND ENGINE LUBRICATION SYSTEM Yogyakarta | 03 – 05 September 2014 | IDR  5.800.000 per participant Bali | 03 – 05 September 2014 | IDR  8.000.000 per participant Bandung |...
  9. TEAM MANAGEMENT – Available Online Seorang leader harus mengetahui potensi dan kelebihan anggota dan mengembangkannya demi tercapainya tujuan perusahaan | Available Online...
  10. Failure Analysis of Mechanical Component Failure Analysis of Mechanical Component Wisma MM UGM, Yogyakarta | 27 – 29 Desember 2011 | Rp 7.500.000,-/ peserta Wisma MM UGM, Yogyakarta | 21 – 23 Febuari 2012 | Rp 7.500.000,-/ peserta...