Pelatihan Boiler Efficiency cocok untuk profesional yang ingin memperluas pengetahuan tentang kinerja pembangkit uap menurut ASME PTC 4-1
Yogyakarta | 11 – 13 Agustus 2020 | Rp 6.500.000 per peserta
Yogyakarta | 22 – 24 September 2020 | Rp 6.500.000 per peserta
Yogyakarta | 20 – 22 Oktober 2020 | Rp 6.500.000 per peserta
Yogyakarta | 17 – 19 November 2020 | Rp 6.500.000 per peserta
Jadwal Training 2020 Selanjutnya …
BOILER EFFICIENCY (ASME PTC 4-1) TRAINING OVERVIEW
Performance of the boiler, like efficiency and evaporation ratio reduces with time, due to poor combustion, heat transfer fouling and poor operation and maintenance. Deterioration of fuel quality and water quality also leads to poor performance of boiler. Efficiency test-ing helps us to find out how far the boiler efficiency drifts away from the best efficiency. Any observed abnormal deviations could therefore be investigated to pinpoint the problem area for necessary corrective action. Hence it is necessary to find out the current level of efficiency for performance evaluation, which is a pre requisite for energy conservation action in industry.
BOILER EFFICIENCY (ASME PTC 4-1) TRAINING OBJECTIVES
Training Objectives ASME PTC 4-1:
- Understanding of object & scope of PTC 4 – 1
- Understanding of definition and description that used on PTC 4 – 1
- Understanding steam generator performance test principle
- Familiar with test instrumentation
- Understanding of measurement methods of measurement methods
- Understanding steam generator performance calculation
- Know how to report of test result
BOILER EFFICIENCY (ASME PTC 4-1) TRAINING CONTENTS
Material Outline Training ASME PTC 4 – 1
- Introduction
- Object & scope of PTC 4 – 1
- Definition and description term
- Performance test principle
- Instrumentation
- Measurement methods
- Performance calculation
- Report of test result
WHO SHOULD ATTEND BOILER EFFICIENCY (ASME PTC 4-1) TRAINING?
This training is recommended to be followed by :
- Mechanical, Construction
- Operators, Technicians, Maintenance Personnel who involved in installation, testing, operation and maintenance of steam generator
- Experienced professionals who want to refresh or broaden their knowledge of steam generator performance according ASME PTC 4- 1
BOILER EFFICIENCY (ASME PTC 4-1) TRAINING TRAINING METHODS
- Lecturing
- Discussion/Sharing
- Case Study
- Simulation
- Evaluation
BOILER EFFICIENCY (ASME PTC 4-1) TRAINING INSTRUCTOR
- Teguh Pudji Purwanto, MT.
- Sigit Budi Hartono, ST., MT.
(Expert in mechanical dan electrical ngineering)
JADWAL TRAINING 2020
- Batch 8 : 11 – 13 Agustus 2020
- Batch 9 : 22 – 24 September 2020
- Batch 10 : 20 – 22 Oktober 2020
- Batch 11 : 17 – 19 November 2020
- Batch 12 : 15 – 17 Desember 2020
- 08.00 – 16.00 WIB
Yogyakarta: Cavinton Hotel Yogyakarta; Neo + Awana Hotel Yogyakarta; Pesonna Malioboro Hotel Yogyakarta
Surabaya: Hotel Neo Gubeng Surabaya; Hotel Santika Pandegiling Surabaya
Malang: Ibis Styles Malang Hotel
Jakarta: Yello Hotel Manggarai Jakarta; Dreamtel Jakarta Hotel
Bandung: Serela Cihampelas Hotel Bandung; Grand Setiabudi Hotel Bandung; Grand Tebu Hotel Bandung
Bali: Ibis Bali Kuta Hotel; Hotel Neo + Kuta Legian Bali
In House Training : Depend on request
TUITION FEE TRAINING
Yogyakarta:
- Publish Rate : Rp 6.500.000,- / participant
- Special Rate : Rp 6.100.000,- / participant (min 4 participants from the same company)
Bandung/ Jakarta/ Surabaya/ Malang:
- Publish Rate : Rp 7.000.000,- / participant
Bali:
- Publish Rate : Rp 8.000.000,- / participant
FASILITAS TRAINING
INCLUDE:
- Meeting Room at hotel, Coffe Break, Lunch
- Module (hard & soft copy/flashdish)
- Training Kit, Souvenir, Sertifikat
- Airport pick up services
- Transportation during training
EXCLUDE:
- Penginapan peserta training
- Pajak (Ppn 10 %)
BOILER EFFICIENCY (ASME PTC 4-1)