CALIBRATION ISO/IEC 17025
Bandung | 22 – 25 April 2019 | Rp 8.750.000/ peserta
Bandung | 06 – 09 Mei 2019 | Rp 8.750.000/ peserta
Bandung | 17 – 20 Juni 2019 | Rp 8.750.000/ peserta
Bandung | 15 – 18 Juli 2019 | Rp 8.750.000/ peserta
Jadwal Training 2019 Selanjutnya …
TRAINING INTRODUCTION:
This course is an introductory look at ISO/IEC 17025 and its requirements for demonstrating the technical competence of testing and calibration laboratories. In this course, you will be introduced to quality requirement, prosedure, uncertainty, and validation method according to ISO/IEC 17025 and will gain insight into the interpretation of the requirements of this international laboratory standard.
TRAINING OBJECTIVES:
You will be able to :
- Understand ISO/IEC 17025
- Understand basic calibration
- Understand instruments characteristics
- Understand performances
- Understand uncertainty
- Understand traceability
- Know calibration
- Understand validation method
- Understand comparison method
CALIBRATION ISO/ IEC 17025 TRAINING OUTLINE:
- Registration vs. Accreditation vs. Certification
- Mutual Recognition Agreements
- Measurement
- Performance Requirements
- Instrument Characteristics
- Calibration
- Traceability
- Method Validation against Method Verification
- Testing Method & Measurement Process
- Investigating Measurement Sensitivity (Detection Limit and Quantitation Limit)
- Establishing Linearity of Measurement
- Estimation of Highest Limit of Measurements
- Determination of Accuracy and Precision
- Comparison to Reference Method
- Investigating Method Selectivity
- Determination of Method Ruggedness/Robustness
CALIBRATION ISO/ IEC 17025 TRAINING INSTRUCTOR :
Ir.Endra Joelianto, Ph.D. and team
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia. He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung. He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB.He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.
VENUE :
Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll
TRAINING DURATION
4 days
- 22 Apr 2019-25 Apr 2019
- 06 Mei 2019-09 Mei 2019
- 17 Jun 2019-20 Jun 2019
- 15 Jul 2019-18 Jul 2019
- 06 Agust 2019-09 Agust 2019
- 03 Sep 2019-06 Sep 2019
- 14 Okt 2019-17 Okt 2019
- 05 Nop 2019-08 Nop 2019
- 02 Des 2019-05 Des 2019
INVESTMENT PRICE/PERSON
- Rp 8.750.000/person (full fare) or
- Rp 8.500.000/person (early bird, payment 1 week before training) or
- Rp 8.250.000/person (if there are 3 or more participants from the same company)
FACILITIES FOR CALIBRATION ISO/ IEC 17025 TRAINING PARTICIPANTS:
- Training Module
- Flashdisk contain training material
- Certificate
- Note Book and Ballpoint
- T-Shirt
- Backpack
- Training Foto
- Training room with full ac facilities and multimedia
- Lunch and twice coffee break everyday of training
- Qualified Instructor
- Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )