Pelatihan ini akan membahas pengoperasian, perawatan kompresor hingga penyelesaian untuk masalah yang timbul

Jadwal Training 2019 Selanjutnya …

Hotel Ibis Kemayoran, Jakarta | 13 – 14 Januari 2020 | Rp. 7.900.000 – RUN

Jadwal Training 2020 Selanjutnya …

Deskripsi Training

Production continuity is a keyword in any process of production activities, in which power system play important role to keep all of the operation. Compressor is known for its capability to store energy in the form of air pressure. In industrial application, compressors are completed with auxiliaries to control the air flow, pressure, and actuators. Compressors will become advantage if it’s operated and maintained properly. Compressors principles and their system performance however should be understood by operator and any person who get involved with them to increase performance of the operation, maintenance, safety, etc.

Materi Training Compressor Operation, Maintenance & Troubleshooting

1. FUNDAMENTALS:

Explain the theory of air/gas compression.
Describe how altitude and moisture affects the compression of air.
Describe the principles of operation of positive displacement and dynamic compressors.
Define air compression terminology such as absolute and gauge pressures, compressor
Displacement and compressor capacity, free air, volumetric efficiency, single and double acting, single and multistage.
Given relative data, perform basic calculations to solve for compressor displacement and compressor volumetric efficiency.

2. RECIPROCATING COMPRESSORS:

State and describe the different types of single and multi-stage reciprocating compressors, state the function of the various compressor parts, including valves.
Describe the methods employed to cool air or gas during compression.
List and describe the different types of prime movers used for compressors.

3. ROTARY COMPRESSORS:

Describe the principles of operation, their application, volume and pressure capabilities, methods of regulation, advantages and disadvantages of the following types of (positive displacement) rotary compressors:

sliding vane
the lobe type
roots type
screw
liquid-sealed

4. CENTRIFUGAL AND AXIAL COMPRESSORS:

Describe the design and operation of the volute and diffuser type centrifugal compressors.
Describe the design and operation of the single-stage double-flow and the four-stage centrifugal compressors.
Describe the design and operation of an axial flow compressor.
State the causes and remedies of compressor surging.

5. COMPRESSOR SYSTEM AUXILIARIES:

Describe the design and operation of intercoolers and aftercoolers; state their location within the system, describe the maintenance requirements of these components.
State the need for air receivers, their preferred location, and the inspection and maintenance requirements as per Code.
Describe the use of air filters, list and provide a description of the different types commonly used.

6. OPERATION, CONTROL AND MAINTENANCE:

Explain the following methods employed to control compressor output:

1. Start/stop, dual control
2. Variable-speed
3. Suction line valve
4. Suction or discharge valve
5. Adjustable stroke
6. Variable clearance volume

List and describe the operation of the various types of controllers and safety devices used in a compressed air system. Describe how these devices can be tested while system is in operation.
Describe the internal and external methods of compressor lubrication.
State the various operational checks done by an operator on both the compressor(s) and the compressed air/gas system to ensure safe and efficient operation.
State the preventive maintenance requirements of compressors, auxiliaries, piping and receivers.
State the probable causes of compressed air/gas compressor, receiver or pipeline explosions.

7. ACT, REGULATIONS AND CODES:

The candidate is expected to be able to locate information relating to the staffing, operation, maintenance, inspection, and testing of the compressor plant and its equipments.
8. SAFETY:

The candidate is expected to be able to fully explain the dangers associated with the operation of a compressor plant and all its components, and state the precautions to be taken to minimize or prevent such dangers.

Peserta Training

The training can be important for all personnel involved with the design, installation, maintenance, operation and servicing of compressor and their basic systems.

Metode Training

Presentasi, Diskusi , Studi Kasus

Jadwal Training 2019

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta
09 – 10 Desember 2019
16 – 17 Desember 2019
23 – 24 Desember 2019
30 – 31 Desember 2019

Waktu Dan Tempat Training 2020

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta
6 – 7 Januari 2020
13 – 14 Januari 2020
20 – 21 Januari 2020
27 – 28 Januari 2020
3 – 4 Februari 2020
10 – 11 Februari 2020
17 – 18 Februari 2020
26 – 27 Februari 2020
2 – 3 Maret 2020
9 – 10 Maret 2020
16 – 17 Maret 2020
23 – 24 Maret 2020
30 – 31 Maret 2020
6 – 7 April 2020
13 – 14 April 2020
20 – 21 April 2020
27 – 28 April 2020
4 – 5 Mei 2020
11 – 12 Mei 2020
2 – 3 Juni 2020
8 – 9 Juni 2020
15 – 16 Juni 2020
22 – 23 Juni 2020
29 – 30 Juni 2020
6 – 7 Juli 2020
13 – 14 Juli 2020
20 – 21 Juli 2020
27 – 28 Juli 2020
3 – 4 Agustus 2020
10 – 11 Agustus 2020
18 – 19 Agustus 2020
24 – 25 Agustus 2020
31 Agustus 2020 – 1 September 2020
7 – 8 Sepember 2020
14 – 15 September 2020
21 – 22 September 2020
28 – 29 September 2020
5 – 6 Oktober 2020
12 – 13 Oktober 2020
19 – 20 Oktober 2020
26 – 27 Oktober 2020
2 – 3 November 2020
9 – 10 November 2020
16 – 17 November 2020
23 – 24 November 2020
30 November 2020 – 1 Desember 2020
7 – 8 Desember 2020
14 – 15 Desember 2020
21 – 22 Desember 2020
28 – 29 Desember 2020

Investasi dan Fasilitas Training

Rp 8.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
Rp 7.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%)) untuk lokasi di Bandung, Jakarta atau Surabaya
Rp 6.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk Lokasi Solo, Semarang atau Yogyakarta
Jika Perusahaan /Instansi mengirimkan lebih dari satu peserta pada judul dan tanggal yang sama maka akan di berikan potongan harga pada peserta kedua dan seterusnya masing – masing sebesar Rp 1.000.000 per peserta
Quota minimum 2 peserta
Quota minimum 3 peserta (Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
Fasilitas: Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

Instruktur Training

Ir Teguh Pudji Poerwanto MT and Team

Compressor Operation, Maintenance & Troubleshooting

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me
Isikan angka/huruf pada gambar

cforms contact form by delicious:days

Materi Training Compressor Operation, Maintenance & Troubleshooting

Compressor Operation, Maintenance & Troubleshooting

Related Training: