COMPRESSOR OPERATION, MAINTENANCE & TROUBLESHOOTING

COMPRESSOR OPERATION, MAINTENANCE & TROUBLESHOOTING

Yogyakarta | 07 – 10 Mei 2019 | Rp 8.500.000/ peserta
Yogyakarta | 24 – 27 Juni 2019 | Rp 8.500.000/ peserta
Yogyakarta | 15 – 18 Juli 2019 | Rp 8.500.000/ peserta
Yogyakarta | 27 – 30 Agustus 2019 | Rp 8.500.000/ peserta

Jadwal Training 2019 Selanjutnya …

 

 

COMPRESSOR TRAINING INTRODUCTION

Production continuity is a keyword in any process of production activities, in which power system play important role to keep all of the operation.
Compressor is known for its capability to store energy in the form of air pressure. In industrial application, compressors are completed with auxiliaries to control the air flow, pressure, and actuators. Compressors will become advantage if it’s operated and maintained properly. Compressors principles and their system performance however should be understood by operator and any person who get involved with them to increase performance of the operation, maintenance, safety, etc.

 

COMPRESSOR TRAINING OUTCOME

In this training, compressor will be discussed from its principle, application, components and its maintenance. Moreover, their control system to improve performance and safety will also be introduced. After completion of this training participant will understand about the basic principle, application and control system that will help them for improving safety and problem solving on operation and maintenance activities.

 

COMPRESSOR TRAINING OUTLINE

1. FUNDAMENTALS:
   1. Explain the theory of air/gas compression.
   2. Describe how altitude and moisture affects the compression of air.
   3. Describe the principles of operation of positive displacement and dynamic compressor
   4. Define air compression terminology such as absolute and gauge pressures, compressor
   5. Displacement and compressor capacity, free air, volumetric efficiency, single and double acting, single and multistage.
   6. Given relative data, perform basic calculations to solve for compressor displacement and compressor volumetric efficiency.
2. RECIPROCATING COMPRESSOR:
   1. State and describe the different types of single and multi-stage reciprocating compressors, state the function of the various compressor parts, including valves.
   2. Describe the methods employed to cool air or gas during compression.
   3. List and describe the different types of prime movers used for compressor.
3. ROTARY COMPRESSOR: Describe the principles of operation, their application, volume and pressure capabilities, methods of regulation, advantages and disadvantages of the following types of (positive displacement) rotary compressors:
   1. sliding vane
   2. the lobe type
   3. roots type
   4. screw
   5. liquid-sealed
4. CENTRIFUGAL AND AXIAL COMPRESSOR:
   1. Describe the design and operation of the volute and diffuser type centrifugal compressors.
   2. Describe the design and operation of the single-stage double-flow and the four-stage centrifugal compressors.
   3. Describe the design and operation of an axial flow compressor.
   4. State the causes and remedies of compressor surging.
5. COMPRESSOR SYSTEM AUXILIARIES:
   1. Describe the design and operation of intercoolers and aftercoolers; state their location within the system, describe the maintenance requirements of these components.
   2. State the need for air receivers, their preferred location, and the inspection and maintenance requirements as per Code.
   3. Describe the use of air filters, list and provide a description of the different types commonly used.
6. OPERATION, CONTROL AND MAINTENANCE:
   1. Explain the following methods employed to control compressor output:
      • Start/stop, dual control
      • Variable-speed
      • Suction line valve
      • Suction or discharge valve
      • Adjustable stroke
      • Variable clearance volume
   2. List and describe the operation of the various types of controllers and safety devices used in a compressed air system. Describe how these devices can be tested while system is in operation.
   3. Describe the internal and external methods of compressor lubrication.
   4. State the various operational checks done by an operator on both the compressor(s) and the compressed air/gas system to ensure safe and efficient operation.
   5. State the preventive maintenance requirements of compressors, auxiliaries, piping and receivers.
   6. State the probable causes of compressed air/gas compressor, receiver or pipeline explosions.
7. ACT, REGULATIONS AND CODES: The candidate is expected to be able to locate information relating to the staffing, operation, maintenance, inspection, and testing of the compressor plant and its equipments.
8. SAFETY: The candidate is expected to be able to fully explain the dangers associated with the operation of a compressor plant and all its components, and state the precautions to be taken to minimize or prevent such dangers.

 

WHO SHOULD ATTEND THIS TRAINING?

The training can be important for all personnel involved with the design, installation, maintenance, operation and servicing of compressor and their basic systems.

 

COMPRESSOR TRAINING INSTRUCTOR

Dr.Ir. Paryana Puspaputra, M.Eng., and Team

 

COMPRESSOR TRAINING VENUE

Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

 

TRAINING DURATION

4 days

 

JADWAL TRAINING 2019

1. 07 Mei 2019-10 Mei 2019
2. 24 Jun 2019-27 Jun 2019
3. 15 Jul 2019-18 Jul 2019
4. 27 Agust 2019-30 Agust 2019
5. 24 Sep 2019-27 Sep 2019
6. 14 Okt 2019-17 Okt 2019
7. 26 Nop 2019-29 Nop 2019
8. 17 Des 2019-20 Des 2019

 

INVESTATION PRICE/PERSON

1. 8.500.000/person (full fare) or
2. 8.250.000/person (early bird, payment 1 week before training) or
3. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with Full AC facilities and multimedia
9. Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days