CONTROL SYSTEM FOR NON CONTROL ENGINEER

CONTROL SYSTEM FOR NON CONTROL ENGINEER

Yogyakarta | 19 – 21 Oktober 2020 | Rp 6.500.000/ peserta
Yogyakarta | 16 – 18 November 2020 | Rp 6.500.000/ peserta
Yogyakarta | 30 November – 02 Desember 2020 | Rp 6.500.000/ peserta

 

 

TUJUAN CONTROL SYSTEM FOR NON CONTROL ENGINEER

Kontrol dan instrumentasi di industri sudah merupakan keharusan yang ditangani oleh bagian instrumentasi dan atau elektrik. Setelah selesai mengikuti kursus ini, peserta dari bagian lain seperti proses, mekanis, operator, dan lain-lain diharapkan akan mengetahui, sistem control dan instrumentasi sehingga memahami betul kelebihan dan keterbatasan sistem kendali dan untuk mempermudah dalam komunikasi lintas bidang yang tidak bisa dihindari pasti terjadi di lapangan.

 

MATERI TRAINING CONTROL SYSTEM

1. Konsep dasar sistem kendali.
2. Transformasi Laplace.
3. Permodelan matematis untuk berbagai macam proses.
4. Transfer  Function.
5. Sistem Pneumatik dan elektrik.
6. Sistem kendali open-loop.
7. Sistem kendali close-loop.
8. Karakteristik Controller.
9. Jenis sensor dan karakteristiknya.
10. Jenis aktuator dan karakteristiknya.
11. Frequency Respon sistem kendali.
12. Optimasi sistem kendali.
13.  Programable Logic Controller.
14. Perawatan dan Troubleshooting.
15. Diskusi interaktif

 

SIAPA SEBAIKNYA MENGIKUTI TRAINING CONTROL SYSTEM FOR NON CONTROL ENGINEER INI?

1. D3 atau SLTA yang berpengalaman kerja minimal 3 tahun, dan atau setara.
2. Teknisi, Operator dan Supervisor didalam bidang non instrumentasi, seperti bagian proses, mekanis, operator, perawatan, dll di berbagai macam industri.
3. Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.
4. Semua pihak yang ingin memahami topik ini.

CONTROL SYSTEM TRAINING INSTRUCTOR

Tugino, ST.,MT. dan Tim

Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon,PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.

 

VENUE CONTROL SYSTEM FOR NON CONTROL ENGINEER

Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

 

DURASI TRAINING

3 hari

 

INVESTATION PRICE/ PERSON

1. Rp. 6.500.000/person (full fare) or
2. Rp. 6.250.000/person (early bird, payment 1 week before training) or
3. Rp. 5.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Modul Training
2. Flashdisk Training berisi materi training control system
3. Sertifikat
4. ATK: NoteBook dan Ballpoint
5. T-Shirt
6. Ransel
7. Foto Training
8. Ruang Training dengan fasilitas Full AC dan multimedia
9. Makan siang dan 2 kali coffeebreak
10.  Instruktur yang Qualified
11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

CONTROL SYSTEM FOR NON CONTROL ENGINEER

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days