Control Valves , Actutors and Pumps

Control Valves , Actutors and Pumps

Yogyakarta | 13 – 16 September 2016 | IDR 7,000,000.00 /participant
Yogyakarta | 17 – 22 October 2016 | IDR 7,000,000.00 /participant

DESCRIPTION

The course presents a practical approach to selection, sizing, installation, operation and maintenance of control valves, actuators and pumps. This training course is designed with a total balance between theory and practical examples and will help the participants in better understanding of the control valve functions, testing and maintenance of valves. This course explains the various factors (like fluid characteristics, valve forces, leakage etc) and considerations that govern selection and sizing of control valve and actuator sizing. It also discusses installation, maintenance and verification of actuator appropriateness, be it for liquid, gas or vapor applications. It lays down criteria for selecting an actuator and associated auxiliary devices. Pumps find extensive use in petrochemical process plants, water circulation systems, A/C and heating systems, and many other applications. Right pump selection appropriate to the application and effective performance testing are essential requirements for prolonged machine life. The course provides participants with useful tips, Do’s and Don’ts in carrying out installation, maintenance and troubleshooting of valves, matching of valve / actuator technical specifications and system operational parameters. Emphasis is given on good engineering practices and relevant practical examples. The course also covers important aspects of control valves their maintenance and periodic testing. A successful valueoverhaul is critical in the reliability of the valve when re-installed in the process. Expert tips are included to ensure an efficient overhaul. The course would also cover pump accessories (shaft seal, bearings, lubrication) their selection, care and maintenance.


WHO SHOULD ATTEND

Ideal for the engineers who are involved in selection, installation or operation of control valves and actuators in the oil & gas, petroleum and petrochemical industries, power plants etc. This course is a good introduction to someone who has had no dealings with valves in the past as well as an important refresher course for valve specialists. Also recommended for operations and maintenance persons, instrumentation and control engineers, process engineers, plant overhauling and troubleshooting engineers and technicians.


SUMMARY OUTLINE

Control Valves

1. Types of control valves
   1. Definition of a control valve
   2. Various types of control valves
      • Equal percent
      • Linear
      • Quick opening
   3. Flow characteristic of various valves
   4. Pressure drop in various valves (K factor)
   5. Choosing a correct valve for intended application
2. Basic classification of valves & their characteristics
   1. Basics of selection and sizing of control valves and matching actuator, meeting system operational requirements etc.
   2. Air valves, safety relief valves and breather cum relief valves – test procedures
   3. Performance evaluation of control valves and actuators
   4. Cavitations in control valves
   5. Diagnostics for valve actuators
   6. Different types of control valves: globe valves, butterfly, eccentric disk, ball, rotary plug, diaphragm and pinch valves

Actuators

• Pneumatic, hydraulic and electric
• Mounting considerations, manual overrides

1. 2.1 Introduction to actuators
   1. Basic actuators and actuator operation
   2. Sizing actuators (overview)
   3. Basic mechanical operation
   4. Control components and configurations
   5. Maintaining actuators safely
2. 2.2 Electric actuators: EIM, Limitorque, Bettis,
3. 2.3 Good installation practices
   1. Inlet line consideration
   2. Outlet line consideration
   3. Reaction forces and support
4. 2.4 Maintenance and troubleshooting
   1. Routine maintenance
   2. Modes of failure and fault finding
   3. Periodic inspection and testing of valves

Pumps

1. Classification and types of pumps
2. Pump operation: priming and cavitation
3. NPSH – Available and Required, NPSH margin
4. Pump performance curves
5. Head – capacity curve [H – Q]
6. Power – capacity curve [P – Q]
7. Efficiency – capacity curve [η – Q]
8. System curve, best efficiency point [BEP]
9. Pump selection and specification
10. Criteria for pump selection, specification / data sheet
11. Affinity laws, drive rating selection
12. Pump performance testing and check points
13. Operation, maintenance & troubleshooting aspects of pumps

COURSE METHOD

• Presentation
• Discuss
• Case Study
• Evaluation
• Simulation

TIME & VENUE

• Jentra Dagen Hotel, Yogyakarta
• 13 – 16 September 2016

  17 – 22 october 2016

4 days (08 am – 04 pm)

COURSE SPEAKER

Teguh Pudji Purwanto, Ir, MT
Teguh Pudji Purwanto experienced more than 26 years in mechanical industry.

COURSE FEE

IDR 7,000,000.00 per participant non residential

FACILITY

• Module / Handout Control Valves Training
• Certificate
• Souvenir
• Training Kit

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days