“CONTROL VALVES AND ACTUATORS: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting, and Maintenance”
Ibis Hotels Malioboro, Yogyakarta | 27 s.d 29 Agustus 2013 | Rp 6.500.000,- Per Peserta
Ibis Hotels Malioboro, Yogyakarta | 19 s.d 21 November 2013 | Rp 6.500.000,- Per Peserta
Deskripsi
Extensive course materials provided contained useful information about valves/sizing and selection both theoretical and practical. You will gain a practical understanding of control valves, actuators, and positioner designs and their applications. The course also provides methods that can be used to identify specific valve problems and arrive at acceptable solutions within engineering tolerance
Tujuan
- Compare various types of final control elements
- Understand a typical valve operation in a control loop
- Differentiate between various types of valves and the benefits of each
- Compare rising stem to rotary style valves
- Analyze a control system to determine control valve needs
- Use ISA standards for control valve specification and selection
- Size valves for any flow condition likely to be found in a process plant
- Evaluate and select actuators for specific applications
- Specify appropriate auxiliaries including positioners and I/P transducers
- Design control valve installations that are safe and trouble-free
Sertifikat Training
Setelah mengikuti training ini, bagi peserta yang lolos kualifikasi akan mendapatkan sertifikat dari lembaga pelaksana training
Materi
1. Introduction:
- Valve in Loop,
- Actuator,
- Positioner
2. Basic Valve Types:
- Globe Valves,
- Ball Valves,
- Plug Valves,
- Butterfly Valves
3. Actuators:
- Spring/Diaphragm,
- Piston,
- Vane,
- Scotch-Yoke,
- R & P
4. Comparison:
- Rising Stem,
- Rotary Stem,
- Accessories,
- Positioner,
- I/P Converters
5. Valve Performance:
- Gain,
- Time,
- Trim,
- Special Needs
6. Flashing/Cavitation & Noise:
- Cause/Effect,
- Prevention,
- OSHA,
- Source and Abatement
7. Installation:
- Performance, Safety and Others
8. Valve Sizing:
- Valve sizing calculation Manual,
- Valve Sizing calculation Computer
9. Specification and Selection:
- Process Requirements,
- Other Considerations
10. Maintenance and Troubleshooting Considerations:
- Special Requirements,
- Diagnostic Tools
11. Smart Valves:
- Available Designs,
- Applications in Industry
12. Test valves to evaluate performance factors
13. Size valves manually and with software
14. Specify valves, actuators, and auxiliaries for specific applications
15. Evaluate operation of valves with pneumatic actuators and positioners
16. Smart valve/positioner operation demonstration
Peserta
This Intensive program covering the educational needs of Instrumentation and Control Engineers & Technicians, Mechanical Engineers & Technicians, Projects Engineers, Operation Engineers, Process and Utility Supervisors, and Technical Supervisory personnel involved in Sizing, Selecting, and Applying Process Control Valves. No specific prerequisite training or experience required for registration.
Koordinator
Dr. Eng. Deendarlianto, & Team
Waktu & Tempat
Yogyakarta, Ibis Hotels Malioboro :
- 26 s.d 28 Februari 2013
- 19 s.d 21 Maret 2013
- 21 s.d 13 Mei 2013
- 27 s.d 29 Agustus 2013
- 19 s.d 21 November 2013
Public Training:
- Rp 6.500.000,- Per Pes erta Nett Non Residential
- ** Untuk pendaftran Group minimal 3 orang Biaya training Rp. 6.000.000,-/per peserta nett non residential***
Fasilitas
- Modul
- Sertifikat
- Souvenir
- Training kit
- 2x Coffe Break dan Lunch
cforms contact form by delicious:days