CONTROL VALVES AND ACTUATORS – Almost Running

“CONTROL VALVES AND ACTUATORS: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting, and Maintenance”  – Almost Running

Ibis Hotels Malioboro, Yogyakarta | 26 s.d 28 Februari 2013 | Rp 7.500.000,-  Per Peserta 

 

 

Deskripsi 

Extensive course materials provided contained useful information about valves/sizing and selection both theoretical and practical. You will gain a practical understanding of control valves, actuators, and positioner designs and their applications. The course also provides methods that can be used to identify specific valve problems and arrive at acceptable solutions within engineering tolerance

Tujuan 

1. Compare various types of final control elements
2. Understand a typical valve operation in a control loop
3. Differentiate between various types of valves and the benefits of each
4. Compare rising stem to rotary style valves
5. Analyze a control system to determine control valve needs
6. Use ISA standards for control valve specification and selection
7. Size valves for any flow condition likely to be found in a process plant
8. Evaluate and select actuators for specific applications
9. Specify appropriate auxiliaries including positioners and I/P transducers
10. Design control valve installations that are safe and trouble-free

 

Sertifikat   Training

Setelah mengikuti training ini, bagi peserta yang lolos kualifikasi akan mendapatkan sertifikat dari lembaga pelaksana training

 

Materi

1.    Introduction:

• Valve in Loop,
• Actuator,
• Positioner

2.    Basic Valve Types:

• Globe Valves,
• Ball Valves,
• Plug Valves,
• Butterfly Valves

3.    Actuators:

• Spring/Diaphragm,
• Piston,
• Vane,
• Scotch-Yoke,
• R & P

4.    Comparison:

• Rising Stem,
• Rotary Stem,
• Accessories,
• Positioner,
• I/P Converters

5.    Valve Performance:

• Gain,
• Time,
• Trim,
• Special Needs

6.    Flashing/Cavitation & Noise:

• Cause/Effect,
• Prevention,
• OSHA,
• Source and Abatement

7.    Installation:

• Performance, Safety and Others

8.    Valve Sizing:

• Valve sizing calculation Manual,
• Valve Sizing calculation Computer

9.    Specification and Selection:

• Process Requirements,
• Other Considerations

10. Maintenance and Troubleshooting Considerations:

• Special Requirements,
• Diagnostic Tools

11. Smart Valves:

• Available Designs,
• Applications in Industry

12. Test valves to evaluate performance factors

13. Size valves manually and with software

14. Specify valves, actuators, and auxiliaries for specific applications

15. Evaluate operation of valves with pneumatic actuators and positioners

16. Smart valve/positioner operation demonstration 

 

Peserta

This Intensive program covering the educational needs of Instrumentation and Control Engineers & Technicians, Mechanical Engineers & Technicians, Projects Engineers, Operation Engineers, Process and Utility Supervisors, and Technical Supervisory personnel involved in Sizing, Selecting, and Applying Process Control Valves. No specific prerequisite training or experience required for registration.

 

Koordinator 

Dr. Eng. Deendarlianto, & Team

 

Time and Venue

• Tanggal : 26 s.d. 28 Februari 2013
• Pukul     : 08.00 – 16.00 WIB
• Tempat  : Hotel IBIS Malioboro Yogyakarta

 

 

 

Course Fee:

Rp 7.500,000,-/ participant Non Residential

 

Fasilitas

•  Modul
•  Sertifikat
•  Souvenir
• Training kit
•  2x Coffe Break dan Lunch

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days