DEEPWATER FLOATING PRODUCTION SYSTEM DESIGN AND ANALYSIS
Hotel 101 Tugu, Yogyakarta | 23 – 25 Maret 2016 | IDR 7.000.000 per participant
Hotel 101 Tugu, Yogyakarta | 04 – 06 April 2016 | IDR 7.000.000 per participant
Hotel 101 Tugu, Yogyakarta | 13 – 15 April 2016 | IDR 7.000.000 per participant
Hotel 101 Tugu, Yogyakarta | 18 – 20 April 2016 | IDR 7.000.000 per participant
Jadwal Training 2016 Selanjutnya …
DESCRIPTION
Floating Production Systems are becoming more common as oil discoveries are made in deeper waters. The objectives of this Workshop are to provide an introduction to the drivers for floater selection and design, and to provide an appreciation of the main tools and methods used in designing and analyzing these structures.
The program will begin by taking a broad look at deepwater development from the standpoint of field development planning, processing, and concept selection. Emphasis will be on the application of structural and naval architectural principles, and design codes, to the sizing and analysis of performance of moored platforms and risers. Examples will include Spars, Tension Leg Platforms, Semi-Submersibles and FPSOs.
After this course the participants should be able to identify the design drivers for the platforms and to perform high level sizing. They should understand the concept of floater stability, the different types of mooring systems and risers, and methods for their design and analysis
By fully participating in this short course, participants with solid background in conventional offshore oil field development, planning, processing and technology application will gain ground understanding on the greater risk of deepwater oil field development, which in short it needs higher commitment, higher and world complex technology and much higher cost involvement.
In the initial part of the course for some introduction way of addressed economic magnitude, technology services and major specific equipment and source required on each stage of deepwater field from the exploration development to the production stages this short course will be beneficial for deepwater oil field engineers, planners as well as the regulator (the authorities) and oil field contractors and services companies.
TRAINING OUTLINES
- Introduction to Deepwater Development Systems
- Introduction, Trends in deepwater development systems, examples of deepwater projects, planning issues, considerations of deepwater field development, concept selection
- Drilling in deepwater environment
- Deepwater challenges and new technologies, drilling functions and considerations, MODU drilling, drilling from Spar and TLP
- Conceptual and Functionality of Floating Production Systems
- Overview of floater capabilities, dry tree system in fixed, compliant Tower, TLP, and Spar platform, wet tree system in TLP, cell Spar, FPSO, control buoy, SS Tieback and Semi-FPS
- Strength consideration of floating structures
- Basic stresses, local buckling stresses, hydrostatic pressure, plated and tubular structure design, design rules and requirement
- Fatigue assessment of floating structures
- Fatigue capacity, action and loads, S-N curves, nominal and hot and spot stress, simplified, deterministic and spectral-based fatigue assessment, fracture mechanics
- Hydrodynamics and global response of floaters
- Wave spectra and its application, wave and fluid forces, dynamics of floating bodies, wave statistics,
- Irregularity of seaway and histogram, response amplitude operator
- Hydrostatic and Stability of Floaters
- Important rules of floating structure design, coordinate system and transformations, buoyancy and stability parameters, hydrostatic stiffness, MODU stability rules
- Mooring design and analysis
- Effect of wind and current loads, station-keeping, passive mooring system, catenary spread and taut mooring system, mooring components and equipment
INSTRUCTOR
Dr. Ir. Nursuhacaryo, M.Sc. and team
WHO SHOULD ATTEND?
Executive Engineers and Managers who are involved and interested in :
- Feasibility Studies on Deepwater Field Development
- Information on new technological development
- Applicability of different floating concepts to the Worldwide projects.
- Civil or Mechanical Engineers and Naval Architects with basic
- background in structural engineering and hydrodynamics, but not familiar with floating structure design.
METHOD
Lecturing, workshop, interactive discussion, sharing and case study.
- 23 – 25 Maret 2016
- 4 – 6 April 2016
- 13 – 15 April 2016
- 18 – 20 April 2016
- 27 – 29 April 2016
- 11 – 13 Mei 2016
- 16 – 18 Mei 2016
- 25 – 27 Mei 2016
- 6 – 8 Juni 2016
- 15 – 17 Juni 2016
- 20 – 22 Juni 2016
- 11 – 13 Juli 2016
- 20 – 22 Juli 2016
- 25 – 27 Juli 2016
- 3 – 5 Agustus 2016
- 8 – 10 Agustus 2016
- 24 – 26 Agustus 2016
- 29 – 31 Agustus 2016
- 7 – 9 September 2016
- 12 – 14 September 2016
- 21 – 23September 2016
- 26 – 28 September 2016
- 12 – 14 Oktober 2016
- 17 – 19 Oktober 2016
- 26 – 28 Oktober 2016
- 7 – 9 November 2016
- 16 – 18 November 2016
- 21 – 23 November 2016
- 6 – 7 Desember 2016
- 14 – 16 Desember 2016
- 21 – 23 Desember 2016
- 26 – 28 Desember 2016
Hotel 101 Tugu | Yogyakarta
TRAINING FEE
- IDR 7.000.000 per participant (Non-Residential)
- Minimal participants : 2 persons (Yogyakarta)
TRAINING FACILITIES
- Quality Training Module
- Stationeries: notebook and ballpoint
- Flashdisk containing materials
- Training bag or backpack
- Morning and afternoon coffee break for at days of deepwater floating training
- Exclusive T-Shirt or Jacket
- Certificate of Completion
- Training photo
- Transportation for participants from the airport/railway station to hotel/training venue. (At least 2 persons from the same company)