DISAIN ALAT PENEKAN DAN PEMBENTUK (DESIGN OF PRESS AND FORMING TOOL)

DISAIN ALAT PENEKAN DAN PEMBENTUK (DESIGN OF PRESS AND FORMING TOOL)

Bandung | 10 – 13 Februari 2015 | Rp 7.950.000/person
Bandung | 10 – 13 Maret 2015 | Rp 7.950.000/person
Bandung | 06 – 09 April 2015 | Rp 7.950.000/person
Bandung | 19 – 22 Mei 2015 | Rp 7.950.000/person

Jadwal Training 2015 Selanjutnya …

 

Dalam proses produksi, selalu menimbulkan biaya langsung maupun tidak langsung. Biaya yang timbul tersebut harus diusahakan pada tingkat yang serendah mungkin tanpa mengurangi kualitasnya, sehinga produk yang dihasilkan nantinya akan mempunyai daya saing tinggi dan pemasaran yang baik, sehingga dapat meningkatkan laba perusahaan.

Untuk mengurangi biaya proses produksi, maka bahan baku harus dapat di proses dalam waktu yang relatif singkat dengan pemakain faktor produksi yang rendah, dalam kaitan tersebut diperlukan sarana-sarana produksi yang efisien dalam hal pengoprerasian maupun pembuatannya.

Efisiensi dan efektifitas suatu alat dan produk sangatlah dibutuhkan dengan proses produksi secara tepat, dan dapat digunakan dalam industri besar maupun industri kecil.

Alat penekan dan pembentuk merupakan salah satu dari sarana produksi efisien yang penggunaannya dalam industri-industri telah terbukti memberikan peranan yang besar dalam upaya menekan biaya produksi.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Disain Alat Penekan dan Pembentuk (Press and Forming Tool).

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perancangan alat penekan dan pembentuk (press dan forming tool) pada industri manufaktur.

TUJUAN TRAINING :

Setelah mengikuti training ini, diharapkan peserta mempiliki Pemahaman tentang pengetahuan dan  keahlian dalam merancang alat penekan dan pembentuk (press dan forming tool).

CAKUPAN MATERI TRAINING :

1.  Press tool

• Prosedur perancangan cutting tool,
• Prinsip operasi dan bagian-bagian cutting tool
• Penentuan gaya dan clearance,
• Perencanaan dan pembuatan cutting tool.

2.  Forming tool

• Prinsip pembentukan,
• Tipe alat pembentuk,
• Penentuan gaya pembentuk dan clearance,
• Bagian-bagian alat pembentuk,
• Perencanaan dan pembuatan alat pembentuk.

Instruktur

SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

VENUE : 

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION :  

4 days

 

TRAINING TIME :  

2. 10 Feb 2015-13 Feb 2015
3. 10 Mar 2015-13 Mar 2015
4. 06 Apr 2015-09 Apr 2015
5. 19 May 2015-22 May 2015
6. 09 Jun 2015-12 Jun 2015
7. 28 Jul 2015-31 Jul 2015
8. 11 Aug 2015-14 Aug 2015
9. 08 Sep 2015-11 Sep 2015
10. 27 Oct 2015-30 Oct 2015
11. 10 Nov 2015-13 Nov 2015
12. 01 Dec 2015-04 Dec 2015

 

INVESTATION PRICE/PERSON :

1. Rp 7.950.000/person (full fare)  or
2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
3.  Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

 

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days