DRILLING MECHANICS AND MATH 1

Bandung, Chemical, Oil and Gas / By

DRILLING MECHANICS AND MATH 1

Bandung | 17 – 19 Juni 2019 | Rp. 7.950.000 Per Peserta
Bandung | 22 – 24 Juli 2019 | Rp. 7.950.000 Per Peserta
Bandung | 21 – 23 Agustus 2019 | Rp. 7.950.000 Per Peserta
Bandung | 18 – 20 September 2019 | Rp. 7.950.000 Per Peserta

Jadwal Training 2019 Selanjutnya …

 

 

DRILLING MECHANICS AND MATH 1 TRAINING DESCRIPTION

The Drilling Mechanics and Math workshop improves operational effectiveness of rig site personnel by providing foundational math skills with a direct linkage to practical drilling and completion applications.

 

DESIGNED FOR

Operator technical support and operations supervision personnel, drilling contractor rig crew and technical support personnel, and service company personnel including fluids / solids control, directional / BHA / MWD, downhole Tools, casing and cementing, bit, wellhead / BOP, QA/QC, and logistics support. A calculator is required.

 

DRILLING MECHANICS AND MATH 1 TRAINING OUTLINE

  1. Order of math operations
  2. Identifying and using the correct units
  3. Unit conversion
  4. Manipulating fractions, decimals, and percentages
  5. Using a scientific calculator
  6. Forces on the rig floor and in the wellbore
  7. Mechanical Advantage
  8. Levers, Gears, and Pulleys
  9. Fluid Mechanics
  10. Hydrostatic pressure, buoyancy turbulence, and friction
  11. Well Control
  12. Casing and Cementing jobs
  13. Drill string make up torque and line pull
  14. Pipe Tallies
  15. Hole cleaning and ECD
  16. Mixing drilling fluids
  17. WOB and BHA requirements
  18. Pump liner requirements
  19. Directional drilling
  20. Drilling Mechanics and Math 1 is typically focused on rig site personnel from entry level through derrickmen.
  21. Drilling Mechanics and Math 2 more fully develops these concepts. The intent is to equip derrickmen, drillers, rig managers, and drilling supervisors to use math on a daily basis to manage the technical demands on the rig site and to familiarize them with math required for the IADC Well Control certification course.

 

INSTRUCTOR :  Dr.-Ing. Bonar Tua Halomoan Marbun  and Team

 

VENUE :  Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

DRILLING MECHANICS AND MATH 1 TRAINING DURATION :  3 days

 

JADWAL TRAINING 2019

  1. 17 Jun 2019-19 Jun 2019
  2. 22 Jul 2019-24 Jul 2019
  3. 21 Agust 2019-23 Agust 2019
  4. 18 Sep 2019-20 Sep 2019
  5. 21 Okt 2019-23 Okt 2019
  6. 20 Nop 2019-22 Nop 2019
  7. 18 Des 2019-20 Des 2019

 

INVESTMENT PRICE/PERSON

  1. Rp. 7.950.000/person (full fare) or
  2. Rp. 7.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  4. (required)
  5. PERSONAL DATA
  6. (required)
  7. (required)
  8. (required)
  10. (valid email required)
  11. (required)
  12. (required)
  16. PRE REGISTRATION DATA (Tidak Mengikat)
  20. (required)
  23. MESSAGE FOR TRAINING PROVIDER
  26. Captcha
 

cforms contact form by delicious:days

Related Training:

  1. DRILLING MECHANICS AND MATH 2 DRILLING MECHANICS AND MATH 2 Bandung | 13 – 15 Mei 2019 | Rp. 7.950.000 Per Peserta Bandung | 26 – 28 Juni 2019 | Rp. 7.950.000 Per Peserta Bandung...
  2. GAS SWEETENING: H2S AND CO2 REMOVAL Teknologi gas sweetening dengan menggunakan alkanolamine atau amine untuk menghilangkan H2S dan CO2 dari gas alam...
  3. GAS HANDLING, CONDITIONING, AND PROCESSING FACILITIES Training ini memberikan pengetahuan dan pemahaman tentang proses dan operasi yang terjadi pada pengolahan gas...
  4. OFFSHORE WELLHEAD PLATFORM OPERATION Training ini akan membahas Hubungan peralatan dengan integritas sumur yang ditekankan...
  5. DESIGN PRIMARY CEMENTING – CEMENTING I DESIGN PRIMARY CEMENTING – CEMENTING I Bandung | 13 – 15 Mei 2019 | Rp. 7.950.000 Per Peserta Bandung | 26 – 28 Juni 2019 | Rp. 7.950.000 Per Peserta...
  6. PRACTICAL DRILLING SKILLS PRACTICAL DRILLING SKILLS Bandung | 22 – 24 Mei 2019 | Rp. 7.950.000 Per Peserta Bandung | 19 – 21 Juni 2019 | Rp. 7.950.000 Per Peserta Bandung | 17...
  7. PETROLEUM ENGINEERING PRACTICES BASIC PETROLEUM ENGINEERING PRACTICES Bandung | 17 – 19 Juni 2019 | Rp. 7.950.000 Per Peserta Bandung | 17 – 19 Juli 2019 | Rp. 7.950.000 Per Peserta Bandung |...
  8. WELL DESIGN AND ENGINEERING WELL DESIGN AND ENGINEERING Bandung | 15 – 17 Mei 2019 | Rp. 7.950.000 Per Peserta Bandung | 26 – 28 Juni 2019 | Rp. 7.950.000 Per Peserta Bandung |...
  9. DRILLING ENGINEERING BASIC DRILLING ENGINEERING Bandung | 27 – 29 Mei 2019 | Rp. 7.950.000 Per Peserta Bandung | 17 – 19 Juni 2019 | Rp. 7.950.000 Per Peserta Bandung | 22...
  10. DRILLING TECHNOLOGY BASIC DRILLING TECHNOLOGY Bandung | 27 – 29 Mei 2019 | Rp. 7.950.000 Per Peserta Bandung | 26 – 28 Juni 2019 | Rp. 7.950.000 Per Peserta Bandung | 29...