Electrical Grounding and Shielding Electronic Systems

Electrical Grounding and Shielding Electronic Systems
Hotel IBIS, Jogja | 16-18 Mei 2012 | 08.00 – 16.00 WIB | Rp. 6.300.000 per peserta
Hotel IBIS, Jogja | 29-31 Mei 2012 | 08.00 – 16.00 WIB | Rp. 6.300.000 per peserta
Hotel IBIS, Jogja |12-14 Juni 2012 | 08.00 – 16.00 WIB | Rp. 6.300.000 per peserta

 

Description

This course stresses the fundamental electromagnetic compatibility principles involved in typical grounding and shielding problems. Understanding the objectives and techniques for grounding and shielding will reduce misconceptions and allow a more systematic approach to replace trial and error methods. For example, the course explains why a signal ground is not the same as a signal return.

Also, solutions for the numerous problems caused by wiring inductance are described and demonstrated. The course emphasizes the development of logical diagnostic techniques for identifying various types of noise problems. Often, the correct identification of the problem is more difficult than the solution. The course is at an introductory level; however, some knowledge of electronic circuits and system design is assumed. Several interference mechanisms and shielding techniques are demonstrated.

Objectives

This course is designed to enable participants to:

• Define electrical ground, signal ground, and signal return
• Describe various grounding techniques
• Diagnose noise problems
• Identify methods to reduce and filter noise
• Define inductive and capacitive shielding
• Describe techniques for reducing electromagnetic coupling
• Select appropriate cabling
• Identify methods to ensure impedance matching
• Identify noise coupling mechanisms

Course Content

 

I. Basic Principles of Noise Reduction

1. Importance of wiring inductance
2. Bandwidth of pulse waveforms
3. Noise coupling mechanisms
4. How to identify the mechanism
5. Common and differential modes

II. Grounding: Why and How?

1. What is electrical ground?
2. Reasons for grounding
3. Signal ground, signal return
4. Ground grid technique
5. Isolated grounding technique
6. Ground loop noise reduction

III. Signal Ground Techniques

1. Ground each current only once
2. Unsafe signal grounding
3. Single point versus ground grid
4. Signal isolation techniques

IV. How to Diagnose Noise Problems

1. Ringing, rounding, and reflections
2. Effects of signal impedance distribution on susceptibility
3. Practical diagnostic techniques
4. Noise coupling examples

V. Noise Reduction Techniques

1. Filtering and shielding
2. Reducing mutual inductance

VI. Filtering Conducted Noise

1. CM and DM filter techniques
2. Improving circuit balance
3. 1 GHZ filtering techniques
4. DC power bus design

VII. Inductive and Capacitive Shielding

1. Self-shielding techniques
2. Misuse of twisted pair
3. Grounding cable shields
4. Shielding examples

VIII. Reducing Electromagnetic Coupling

1. Identifying EM coupling
2. Controlling CM currents

Who Should Attend
This course is recommended for electrical engineers, technicians, designers and release engineers responsible for electronic or electromechanical products.

Istructor

• Ir. Teguh Santoso
• Ir. T. Haryono, M.Sc., CEng MIEE

Time & Venue

• Tanggal   :
• 16-18 Mei 2012
• 29-31 Mei 2012
• 12-14 Juni 2012
• Pukul       : 08.00 – 16.00 WIB
• Tempat    : Hotel IBIS Jogja

Course Fee

•  Rp. 6.300.000 per peserta ( Non Residensial ) Minimum 3 peserta
• Rp. 5.950.000 per peserta ( Non Residential ) Minimum 3 peserta dari perusahaan yang sama ( earlybird)
• Rp. 5.450.000 per peserta ( Non Residensial ) paket pendaftaran min 5 peserta dari perusahaan yang sama.

Facilities

• Training Kit ( Blocknote, pen, stabillo)
• Bag or bagpackers
• ·Module / Handout
• ·Softcopy Materi
• Talenta Merchandise
• Sertifikat pelatihan
• Training room full AC and Multimedia
• 2xCoffe Break & 1 Lunch
• Airport pickup service ( hanya untuk Jogja)

 

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days