GAS TURBINES : OPERATION AND PERFORMANCE

GAS TURBINES : OPERATION AND PERFORMANCE

Bandung | Selasa-Jumat, 10-13 Juli 2012 | Rp 8.500.000/peserta 
Bandung | Selasa-Jumat, 24 – 27 Juli 2012  | Rp 8.500.000/peserta 
Bandung | Selasa-Jumat, 7-10 Agustus 2012 | Rp 8.500.000/peserta
Bandung | Selasa-Jumat, 28-31 Agustus 2012 | Rp 8.500.000/peserta 
Bandung | Selasa-Jumat, 04 – 07 September  2012 | Rp 8.500.000/peserta 
Bandung | Selasa-Jumat, 18 – 07 September  2012 | Rp 8.500.000/peserta 
Bandung | Selasa-Jumat, 02 – 05 Oktober  2012 | Rp 8.500.000/peserta 
Bandung | Selasa-Jumat, 16 – 19 Oktober  2012 | Rp 8.500.000/peserta
Bandung | Selasa-Jumat, 06 – 09 November2012 | Rp 8.500.000/peserta
Bandung | Selasa-Jumat, 27 – 30 November  2012 | Rp 8.500.000/peserta
Bandung | Selasa-Jumat, 04 – 07 Desember 2012 | Rp 8.500.000/peserta
Bandung | Selasa-Jumat, 18 – 21 Desember 2012 | Rp 8.500.000/peserta

ABSTRACT

Saat ini sistem turbin gas telah banyak diterapkan untuk berbagai keperluan seperti mesin penggerak generator listrik, mesin industri, pesawat terbang dan lainnya. Keunggulan sistem turbin gas diantaranya adalah dapat dipasang dengan cepat dan biaya investasi yang relatif rendah jika dibandingkan dengan instalasi turbin uap dan motor diesel untuk pusat tenaga listrik. Meskipun dalam beberapa hal sedikit lebih rumit jika dibandingkan system turbin uap.

Sebagai alat yang tersusun atas komponen-komponen utama seperti air inlet section, compressor section, combustion section, turbine section, dan exhaust section, kinerja Gas-turbine engine haruslah terjaga reliabilitasnya. Oleh karena itu perlu adanya suatu pemahaman yang memadai dari para teknisi dan operator dalam mengoperasikan gas-turbine engine agar keandalannya dan performanya tetap terjaga.

TUJUAN

• Peserta memahami prinsip kerja turbin gas yang digunakan dalam mesin industri
• Peserta memahami spesifikasi turbin gas.
• Peserta memahami fungsi setiap komponen utama dan pendukung serta ketahanannya
• Peserta memahami parameter operasi turbin gas dan turbin uap
• Peserta mampu mengambil langkah-langkah tepat setiap kali terjadi kelainan dalam operasi
• Peserta memahami pertimbangan yang melatarbelakangi setiap langkah perawatan

MATERI PELATIHAN

1. Basic Theory
   – Types of gas turbine
   – Working cycles and efficiency
   – Materials
   – Standard codes
   – Fuel system and combustion process
2. Components, Selection Procedures and Constructions
   – General construction
   – Construction of compressor
   – Construction of turbine
   – Construction of combustion system
   – Function and principal work of supporting components
   – Selection and use of compressor for gas turbine
   – Selection and use of gas turbine for gas fluid work
3. Characteristic and Performance of Gas Turbine
   – Application and simulation of gas turbine uses
   – Analysis of trouble possibility and way of handle it
   – Technical and economical consideration for selection and uses of gas turbine
4. Maintenance Management
   – Basic of maintenance management system
   – Maintenance program
   – Hot components and limit of hot components repair
5.  Gas Turbine Vibration
   – Vibration and introduction to balancing of rotating equipment
6. Testing and Performance
   – Testing facilities
   – Turbine performance determination and calculation
   – Acceptance and performance testing
   – Performance monitoring
7. Therefore, after successfully completed the 4-day course the participant
   is expected to:

–  Understand gas turbine general system, function and operation cycle
–  Able to interpret gas turbine construction with general function of major sections
–  Well understand common problem in operation of gas turbine
–  Have good knowledge of failure in gas turbine
–  Have basic knowledge of vibration problem generated by rotating equipment
–  Have basic understanding of field inspection and knowledge of maintenance plan of gas engine
–  Have good skill of gas turbine performance monitoring and its troubleshooting
–  Understand basic concept of gas turbine performance parameter

 

PARTICIPANTS

1. Electrical & Mechanical Engineer / Supervisor
2. Instrument Engineer / Supervisor
3. Professionals
4. Plant Maintenance / Operators / Supervisor / Superintendent

 

INSTRUKTUR

Teguh Puji Purwanto, Ir, MT

COURSE METHODS

Multimedia, Group Discussion, Role Play, Case Study

COURSE TUTION

Biaya pelatihan sebesar Rp 8.500.000/peserta Non residensial. Khusus untuk pengiriman 3 peserta dari perusahaan yang sama, biaya pendaftaran sebesar Rp. 8.000.000

FACILITIES

• Training Kit ( Tas seminar, ATK, Handout)
• Sertifikat
• Meeting room Hotel ****
• 2x Coffee Break and Lunch per hari
• Souvenir
• Special Dinner
• City Tour

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days