HYDRAULICS POWER SYSTEM

Peserta pelatihan hydraulic ini akan mempelajari teori dasar terkait dengan sistem tenaga hidrolik serta pemanfaatannya

Bandung | 14 – 18 September 2020 | Rp 9.750.000/ peserta
Bandung | 05 – 09 Oktober 2020 | Rp 9.750.000/ peserta
Bandung | 02 – 06 November 2020 | Rp 9.750.000/ peserta
Bandung | 14 – 18 Desember 2020 | Rp 9.750.000/ peserta

Jadwal Training 2020 Selanjutnya …

 

 

YOU WILL LEARN:

• Basic theory of hydraulics in relation to hydraulic power system
• Basic calculation of hydraulic transmission power and knowledge about basic hydraulics circuit
• The utilization of hydraulics system in industries and its advantages d.    Basic analyzing capability on simple hydraulic circuit

 

HYDRAULICS POWER SYSTEM TRAINING INSTRUCTOR

1. Introduction to Fluid Power
   • History of Fluid Power
   • Advantages of Fluid Power
   • Application of Fluid Power
   • Component of a Fluid Power System
   • Type of Fluid Power Systems
   • The Fluid Power Industry
2. Properties of Hydraulic Fluids
   • Fluids
   • Weight, Density and Specific Gravity
   • Pressure, Head and Force
   • The Metric SI System
   • Pascal Law
   • Bulk Modulus
   • Viscosity and Viscosity Index
   • Oxidation and Corrosion Prevention
   • Fire and Foam Resistance Fluids
   • Lubricating Ability
   • General Types of Fluids
3. Energy and Power in Hydraulic Systems
   • Review of Mechanics
   • Application Pascal Law
   • Conservation of Energy
   • Hydraulic Horse Power
   • Bernoulli Equation
   • Energy, Power and Flow rates in SI system
4. The Distribution System
   • Sizing Flow rate requirement
   • Pressure Rating of Conductors
   • Steel Pipes
   • Steel Tubing
   • Plastic Tubing
   • Flexible Hoses
   • Quick Disconnect Couplings
5. Basic Hydraulic Flow in Pipes
   • Laminar and Turbulent Flow
   • Reynolds number
   • Darcy’s Equation
   • Frictional Losses in Laminar and Turbulent Flow
   • Losses in Valves and Fittings
   • Equivalent Length Technique
   • Hydraulic Circuit Analysis
   • Flow Measurement
   • Pressure Measurement
6. The Source of Hydraulic Power
   • Pumping Theory
   • Pump Classification
   • Gear pump
   • Vane pump
   • Piston Pump
   • Pump Performance
   • Pump selection
   • Pressure Intensifier
   • Pump Performance rating
7. Fluid Power Actuators
   • Linear hydraulic actuators
   • Limited Rotation Hydraulic Actuator
   • Vane motors
   • Piston Motors
   • Hydraulic Motor Performance
   • Hydrostatic transmissions
   • Electro hydraulic Stepping Motors
   • Low Speed High Torque Motors
8. Control Components in Hydraulic Systems
   • Directional Control Valves
   • Pressure Control Valves
   • Flow Control Valves
   • Servo Valves
   • Hydraulic Fuses
   • Pressure and Temperature Switch
   • Shock Absorber
9. Hydraulic Circuit Design and Analysis
   • Control Single Acting Hydraulic Cylinder
   • Control of Double Acting Cylinder
   • Regenerative Circuit
   • Pump unloading Circuit
   • Double Pump Hydraulic System
   • Pressure Intensifier Circuit
   • Counter Balance Valve Application
   • Hydraulic cylinder sequencing circuit
   • Fail safe circuits
   • Speed Control Of a Hydraulic Motor
   • Hydrostatic Transmission System

 

TRAINING INSTRUCTOR

Ir. I Nengah Diasta, M.Eng.

Ir. I Nengah Diasta, M.Eng.  is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc.

Ir. I Nengah Diasta, M.Eng.  has much experiences in real practical work in project implementation and has collaborated with many institution and companies. Ir. I Nengah Diasta, M.Eng.  has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc.  Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX,  Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.

 

TRAINING VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION

5 days

 

JADWAL TRAINING 2020

1. 14 Sep 2020-18 Sep 2020
2. 05 Okt 2020-09 Okt 2020
3. 02 Nop 2020-06 Nop 2020
4. 14 Des 2020-18 Des 2020

 

INVESTATION PRICE/PERSON

1. Rp 9.750.000/person (full fare) or
2. Rp 9.500.000/person (early bird, payment 1 week before training) or
3. Rp 9.250.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Bag
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

HYDRAULICS POWER SYSTEM

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days