INDUSTRIAL CONTROL SYSTEMS

INDUSTRIAL CONTROL SYSTEMS

Yogyakarta | 14 – 17 Mei 2019 | Rp 8.500.000/ peserta
Yogyakarta | 17 – 20 Juni 2019 | Rp 8.500.000/ peserta
Yogyakarta | 09 – 12 Juli 2019 | Rp 8.500.000/ peserta
Yogyakarta | 05 – 08 Agustus 2019 | Rp 8.500.000/ peserta

Jadwal Training 2019 Selanjutnya …

 

 

INDUSTRIAL CONTROL SYSTEMS TRAINING INTRODUCTION

All industrial and manufacturing processes operate under the control of a variety of automated and computer-based control systems. As process control technology evolves rapidly, and the digital age of Fieldbus instruments emerging, it is necessary for technical staffs who are involved in the field of process control and instrumentation to continuously upgrade their technical skills and knowledge.        This course is designed to help students to understand the basic principles and importance of process control in industrial process plants; Digital Signal Processing, Stability, Programmable logic controllers (PLC) and various control functions.
After completing this Industrial Control Systems course, Students will have the professional knowledge to ensure that the systems and processes operate effectively, efficiently and safely.

 

WHO SHOULD ATTEND THIS TRAINING?

• Electrical Engineers
• Electronics Engineers
• Engineering assistants
• Plant maintenance engineers
• Service personnel
• Instrumentation technologists
• Technicians
• Process control technologists
• Supervisors
• Management executives

 

INDUSTRIAL CONTROL SYSTEMS TRAINING MATERIAL OUTLINE

1. DATA ACQUISITION AND CONTROL

• Process
• Fundamentals of automatic process control
• Simple manual control
• Automatic control
• Open loop system
• Closed loop system
• Feedback control
• Digital definition

2. DIGITAL SIGNAL PROCESSING

• Digital control principles
• Action in digital control loops
• Computer basic architecture
• Transducers and sensors
• Digital closed loop control system
• PLC
• SCADA

3. TOOLS OF DYNAMIC ANALYSIS

• Mathematical tools
• Development tools
• Assembly language tools
• Other software tools

4. LAPLACE TRANSFORMS

• Functions in frequency domain
• Laplace functions
• Table of Laplace transforms
• Ideal step function
• Ideal Ramp function
• Ideal Sinusoidal function

5. MATHEMATICAL DESCRIPTION OF CHEMICAL PROCESSES

• Importance of the process model
• Mathematical models
• Dependent and Independent variables
• Lumped parameter systems
• Distributed parameter systems
• Discrete Time systems

6. PROCESS MODELS

• General conservation principles
• Conservation of Mass, Momentum and Energy
• Mass Balance
• Energy Balance
• State – Space Models
• Transform-Domain Models
• Impulse response Models

7. INTERRELATIONSHIP BETWEEN PROCESS MODELS

• State – Space  and Impulse-Response Models
• Transform-Domain and Impulse-Response Models
• Transform-Domain and Frequency-Response Models

8. TRANSFER FUNCTION

• Properties of Transfer function
• Transfer function of a first order process
• Two first order lags in series
• Feedback control system

9. FIRST ORDER SYSTEMS

• Typical Block Diagram of Process
• Transfer function of a first order process
• Level control system
• Simple tank level problem
• Elementary block diagram of tank process

10. RESPONSE OF FIRST ORDER SYSTEMS TO VARIOUS INPUTS

• Step response
• Rectangular pulse response
• Impulse response
• Sinusoidal response
• Ultimate periodic response
• Frequency response

11. PURE GAIN AND PURE CAPACITY SYSTEMS

• Response of pure gain system to input
• Example
• Resistance capacitance types of process
• Response of pure capacity system to various inputs
• Response of pure gain system to Rectangular pulse input

12. LEAD/LAG SYSTEMS

• Characteristics parameters
• Obtaining Dynamic Response
• Unit step response Lead/Lag System

13. TWO 1ST ORDER SYSTEMS IN SERIES

• Differential equation model
• Transfer function model
• Non interacting systems in series
• Two tank process

14. SECOND ORDER SYSTEM IN SERIES

• Physical systems with second order dynamics
• Second order system with step Input
• Response of Second order system with  Input
• Second order processes responses and systems

15. N ORDER SYSTEM IN SERIES

• General Nth Order System
• Higher order system with zeroes
• Unit step response

16. CONCEPTS OF STABILITY

• Response of process for input forcing function
• Stable system
• Stability of dynamic system
• Unstable system
• Asymptotically stability and BIBO stability
• Important considerations in process control

17. STABILITY OF LINEAR AND NONLINEAR SYSTEMS

• Critically stable systems
• Unstable systems
• Dynamic behavior of open loop unstable systems
• Systems with sustained oscillations

18. STABILITY OF FEEDBACK CONTROL

• Stability criteria
• Mathematical criteria for stability
• Considerations for critical frequency
• Industrial control in practice
• Process response curve
• Dead zone

19. CLASSIFICATION OF CONTROL

• Open loop system
• Closed loop system
• Concept of feed-forward control
• Feed-forward control

20. FEEDBACK CONTROL

• Process Modeling
• Drawbacks in feedback control
• Modes of Feedback control
• Proportional or gain mode
• Integral or reset mode
• Derivative or rate mode

21. BLOCK DIAGRAM

• Development of block diagram
• Simple tank level control
• Typical block diagram of a plant
• Common building blocks
• Block diagram of a REAL controller
• Block diagram of transformation theorems

 

INSTRUCTOR :  Harry Prabowo, ST., M.Eng. dan Tim

 

VENUE :  Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

 

TRAINING DURATION :  4 days

 

JADWAL TRAINING 2019

1. 14 Mei 2019-17 Mei 2019
2. 17 Jun 2019-20 Jun 2019
3. 09 Jul 2019-12 Jul 2019
4. 05 Agust 2019-08 Agust 2019
5. 02 Sep 2019-05 Sep 2019
6. 08 Okt 2019-11 Okt 2019
7. 04 Nop 2019-07 Nop 2019
8. 10 Des 2019-13 Des 2019

 

INVESTMENT PRICE/PERSON

1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Modul Training
2. Flashdisk Training berisi materi training
3. Sertifikat
4. ATK: NoteBook dan Ballpoint
5. T-Shirt
6. Ransel
7. Foto Training
8. Ruang Training dengan fasilitas Full AC dan multimedia
9. Makan siang dan 2 kali coffeebreak
10. Instruktur yang Qualified
11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days