INSTRUMENT AND PROCESS CONTROL SYSTEM – Yogyakarta

INSTRUMENT AND PROCESS CONTROL SYSTEM  – Yogyakarta

Hotel Ibis Styles Dagen, Yogyakarta | 23 – 25 Juli 2013 | IDR  6.500.000 
Hotel Ibis Styles Dagen, Yogyakarta | 13 – 15 Agustus  2013 | IDR  6.500.000 
Hotel Ibis Styles Dagen, Yogyakarta | 28 – 30 Agustus 2013 | IDR  6.500.000 
Hotel Ibis Styles Dagen, Yogyakarta | 04 – 06 September 2013 | IDR  6.500.000 
Hotel Ibis Styles Dagen, Yogyakarta | 25 – 27 September  2013 | IDR  6.500.000 
Hotel Ibis Styles Dagen, Yogyakarta | 8 – 10 Oktober 2013 | IDR  6.500.000 
Hotel Ibis Styles Dagen, Yogyakarta | 22 – 24 Oktober  2013 | IDR  6.500.000 

Jadwal Training 2013 Selanjutnya …


 

 

DESCRIPTION
This course covers instrumentation and control system for industrial applications, the operation of PID (Process & Instrumentation Diagram) controllers and the usually implemented algorithm of commercial PID controllers. Also methods of controller tuning are presented and practiced.

 

OBJECTIVES

  1. Understand the concept of instrumentation and control
  2. Understand the concept of industrial measurement and control
  3. Understand the concept of PID control
  4. Use and tune PID controller for set-point and load disturbances
  5. Know and understand the differences of PID controller algorithm of commercial PID controller

 

COURSE OUTLINE
1. Introduction to Instrumentation and Control

  • Concept of process control
  • Continuous vs batch process
  • Components of control system
  • Graphic description of loop components

2. Concept of Industrial Measurement

  • Overview of measurement systems
  • Characteristic of measuring instruments
  •  Process variables measurements

3. Dynamic of Plant

  • Process characteristics
  • Process load
  • Gain, dead time and time constant

4. P&ID Documentation

  •  Ballon symbols
  •  Instrument symbols

5. Performance of control systems

  • Performance criteria
  • Stability

6. PID Controllers

  • Proportional control mode
  • Integral control mode
  • Derivative control mode
  • Composite control mode

7. Tuning PID Controllers

  • Practical approach
  •  Ziegler – Nichols methods

8. PID Algorithm in Commercial PID

  • PID structure on DCS


WHO SHOULD ATTEND?

  • The following category of professionals should attend:
  • Instrumentation Engineers & Technicians
  •  Design and Process Engineers
  • Operation Engineer
  • Asset Manager Team members
  • Maintenance Manager/Superintendent & Supervisor
  • Everybody who are responsible to select, specify, design, operate, maintain, process instrumentation & control system.

 

 

INSTRUCTOR

Ir. Teguh Santosa, MT

 

 

TIME & VENUE

  • 23-25 Juli / 13-15 Agustus / 28-30 Agustus / 4-6 September / 25-27 September / 8-10 Oktober / 22-24 Oktober / 11-13 November / 27-29 November / 4-6 Desember  / 17-19 Desember 2013
  • Hotel Ibis Styles Dagen – Yogyakarta

 

TRAINING FEE

  • IDR  6.500.000 per participant (Non-Residential)
  • Minimal participants : 2 persons

 

TRAINING FACILITIES

  • Quality Training Module
  •  Tas Backpack
  •  Stationeries
  •  Sertifikat
  •  Exclusive Polo shirt atau jaket
  •  Flashdisk berisi materi training
  •  2x coffee break dan lunch
  • Training akan running apabila telah tercapai kuota minimal peserta 2 orang.
  • Transportasi Peserta dari Bandara/Stasiun KA ke training venue. (Minimal 2 orang peserta dari perusahaan yang sama)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days