MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE
Cavinton Hotel, Yogyakarta | 28 – 30 Oktober 2014 | Rp.7.500.000
Cavinton Hotel, Yogyakarta | 24 – 26 November 2014 | Rp.7.500.000
Cavinton Hotel, Yogyakarta | 17 – 19 Desember 2014 | Rp.7.500.000

 

 

DESCRIPTION MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

Industrial machinery or power plant is a major supporter of the industry and has a very high critical rate. This means that if there is a sudden damage, the industry will experience huge losses both morally and materially. Therefore, industrial machine that has a high critical level must be monitoring to avoid a sudden damage. Maintenance techniques that can be applied is a preventive maintenance which the main point is a scheduled maintenance and predictive maintenance. By applying predictive maintenance, the symptoms of damage can be detected as early as possible and the cost of treatment can be suppressed or reduced.

 

OBJECTIVES

  • Participants understand machine condition monitoring techniques
  • Participants can choose the engine condition monitoring techniques
  • Participants can do the monitoring machine condition

 

WHO SUPPOSED TO ATTENDED

  • Electrical Engineer/Supervisor
  • Instrument Engineer/Supervisor
  • Professionals
  • Plant Maintenance/Operators/Supervisors/Superintendent
  • Technician

 

OUTLINE MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

  1. Maintenance techniques and strategies
  2. Basic regular maintenance
  3. Basic predictive maintenance
  4. Bathtub curve
  5. Selection of machine condition monitoring techniques
  6. Inspection / monitoring of visual
  7. Use of lubricants
  8. Lubricant contaminants
  9. Inspection / monitoring and analysis of lubricants
  10. Inspection / monitoring and vibration analysis
  11. Vibration spectrum analysis
  12. Inspection and monitoring of geometric
  13. Analysis of leveling, run out and misalignment
  14. Alignment shaft

 

TRAINER

Cecep Slamet Abadi

 

TRAINING METHOD

  • Presentation
  • Discussion
  • Case Study
  • Evaluation

 

TIME & PLACE

  • 28-30 Oktober 2014
  • 24 – 26 November 2014
  • 17 – 19 Desember 2014
  • Cavinton Hotel, Yogyakarta

 

TRAINING FEE

Rp.7.500.000,- / peserta/ non residential

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days