Maintenance and Troubleshooting of BELT CONVEYORS AND CHUTES Plus CONVEYOR, CHUTE AND FEEDER DESIGN
Yogyakarta| Batch II : 12 – 14 Juli 2011| 08:00-16:00 WIB |Rp 4.550,000,-/peserta (Non resindential)
Description
The training will be take about three days – the first two days will cover basic conveyors, selection, safety, legal obligations, terminology and background and an optional third day will deal with the nuts and bolts of conveyor, chute and feeder design. Belt conveyors frequently provide the most satisfactory and economical method of transporting materials such as mine ores, earth, sand, crushed stone, cement and concrete. The high and continuous speed of operation of the belt makes for a high capacity of transport of materials. This workshop is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to troubleshooting, maintenance and basic design rules of conveyors and chutes. It is intended to cover the fundamentals of belt conveying and would be useful for those with little experience in this area. Before commencing a detailed course on conveyors it is important to have a solid practical knowledge of the material to be conveyed. A basic knowledge is provided of the bulk materials characteristics and properties. This will enable you to have a far stronger ability to troubleshoot and design workable conveyor systems. Numerous tips throughout the course make it practical and topical. You will also engage in problem solving and case studies to absorb the materials as quickly and effectively as possible
Materi
1. INTRODUCTION
- Fundamentals of bulk materials handling
- Nature of bulk solids
- Characteristics of generally used bulk materials
- Conveyors and chutes overview
- Practical Exercise
2. BELT CONVEYING
- Introduction
- Layout
- Basic Configuration
- Components of a standard conveyor
- Capacity of belt conveyors and selection of belt width
- Selection of other components (belt, idlers, pulleys and takeups etc.)
- Simple calculation of belt tension
- Selection of drive
- Troubleshooting tips
- Take-ups
- Operation and maintenance of belts
- Tips for cost savings
- Practical Exercise
3. SAFETY OF CONVEYORS
- Conveyor safety standard
- General background on AS 4024.1 (RA and hazard recognition)
- Hazard recognition
- History of accidents
- Key conveyor safety issues
- Demonstration of unsafe conveyors
- AS 1755 conveyors
- Chute doors hazards and controls
- Case Study
- Practical Exercise
4. MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS
- Troubleshooting conveyor problems
- Types of joints
- Splice failures
- Splice inspections
- Splice repairs
- Typical problems
- Root cause process
- Systematic approach for tracking
- Site specific problems
- Case Studi
- Practical Exercise
5. CHUTE MAINTENANCE AND TROUBLESHOOTING
- Transfer chutes theory
- Laser scanning applications
- Best practice design
- Boosting flow
- Troubleshooting chutes
Peserta
- Maintenance Engineers, Technicians and Staff
- Plant Engineers
- Operation, Maintenance, Inspection and Repair Managers,
- Supervisors and Engineers
- Mechanical Engineers and Technicians
- Design Engineers
- Electrical Engineers and Technicians
- Consulting Engineers
Instruktur :
Teguh Pudji Purwanto, Ir, MT & Teguh Santosa, Ir And Team
- Expert in electrical & Mechanical Engineering
- Active as public trainer & Consultant in local & national seminar
Course Method
- Presentasi
- Diskusi
- Studi Kasus
- Evaluasi
Fee:
- Pelatihan Reguler (NON RESIDENTIAL)
- Rp. 4.550.000,-/nett per participant non residential
- Rp 4.000.000,-/3 peserta dari perusahaan yang sama
Waktu dan Tempat Pelaksanaan :
- Batch II : 12 – 14 Juli 2011
- Yogyakarta
Fascilities
- Module / Handout
- Sertifikat
- Souvenir
- Training Kit