MAINTENANCE MANAGEMENT

Training ini membahas tentang wawasan & pengetahuan manajemen perawatan mesin untuk mendukung keberhasilan sistem produksi

Bandung | 18 – 21 Agustus 2020 | Rp 8.500.000/ peserta
Bandung | 21 – 24 September 2020 | Rp 8.500.000/ peserta
Bandung | 19 – 22 Oktober 2020 | Rp 8.500.000/ peserta

Jadwal Training 2020 Selanjutnya …

 

 

PENDAHULUAN TRAINING

Sebagai salah satu kinerja perfomansi suatu perusahaan manufaktur moderen saat ini adalah cepat tanggapnya sistem pelaksanaan perawatan yang diakibatkan adanya perubahan dan perkembangan fasilitas pabrik yang dirancang sedemikian rupa kompkleks dengan sasaran untuk menghasilkan produk dengan kualitas tinggi dan cepat. Pada dasarnya perawatan merupakan kombinasi dari semua tindakan teknik dan tindakan administratatif untuk mempertahankan kondisi atau mengembalikan kondisi fungsi komponen.

Sebagai faktor pendukung untuk menunjang keberhasilan sistem produksi bagi  industri rekayasa untuk menghasilkan produk yang berkualitas dan kompetitif diperlukan teknik maupun metoda pengelolaan atau manajemen perawatan yang handal. Namun tidaklah mudah penerapan bentuk-bentuk kebijakan perawatan mulai dari yang tidak direncanakan hingga terencanapun masih pula ditemukan hal-hal yang tidak efisien.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Manajemen Perawatan (Maintenance Management).

 

MANFAAT YANG DIPEROLEH

Membekali peserta tentang wawasan dan pengetahuan manajemen perawatan mesin untuk mendukung keberhasilan sistem produksi.

Setelah mengikuti pelatihan maintenance management ini, peserta diharapkan mampu:

• Memahami dan menjelaskan konsep dan strategi perawatan
• Menjelaskan manajemen dan organisasi perawatan
• Menjelaskan perencanaan perawatan
• Menjelaskan penjadwalan perawatan
• Menjelaskan manajemen suku cadang
• Menjelaskan manajemen pergudangan
• Menjelaskan perencanaan biaya perawatan
• Menjelaskan konsep reliability centered maintenance
• Menjelaskan konsep total prodcutive maintenance

 

MATERI TRAINING MAINTENANCE MANAGEMENT

1.    Konsep dan strategi perawatan.

• Pengertian, tujuan, dan perkembangan perawatan, strategi perawatan, kerusakan dan sumber utama kerusakan, pola kerusakan mesin dan pencegahannya, dampak adanya perawatan, dan fungsi teknologi dalam perawatan.

2.    Manajemen dan organisasi perawatan.

• Pengertian manajemen perawatan, aspek-aspek manajemen perawatan, prosedur perawatan, organisasi kerja bidang perawatan (arti organisasi, struktur organisasi, bentuk-bentuk organisasi, contoh organisasi perawatan).

3.    Perencanaan perawatan.

• Pengertian perencanaan dan faktor-faktor penunjang, langkah-langkah penyusunan perencanaan, kebijakan dan prinsip perencanaan perawatan, tahapan perencanaan pekerjaan perawatan, perencanaan tenaga kerja perawatan, dan standar perencanaan perawatan

4.    Penjadwalan perawatan.

• Pengertian dan tujuan penjadwalan, prinsip dasar penjadwalan, pengelompokkan penjadwalan perawatan, dan dasar penjadwalan pekerjaan perawatan.

5.    Manajemen suku cadang

• Manajemen suku cadang: klasifikasi suku cadang, prinsip suku cadang, matrik penyediaan suku cadang, administrasi suku cadang, penentuan kebutuhan suku cadang, persediaan suku cadang,

6.    Manajemen pergudangan

• Manajemen pergudangan: pergerakan material, pengertian pergudangan dan gudang, fungsi dan tanggung jawab gudang, bentuk dan peran gudang, tugas pergudangan, alasan perlunya manajemen pergudangan, ukuran unjuk kerja pergudangan, prinsip manajemen pergudangan, administrasi pergudangan, perencanaan kapasitas gudang,

7.    Perencanaan biaya perawatan.

• Pengertian dan efisiensi biaya perawatan, factor-faktor pertimbangan penyusunan anggaran perawatan, estimasi biaya dan penyusunan anggaran perawatan, dan perhitungan biaya perawatan total.

8.    Konsep RCM (Reliability Centered Maintenance)

• Tujuan RCM, prinsip dasar RCM, langkah proses RCM, komponen RCM, laju kerusakan dan ukuran kinerja peralatan.

9.    Konsep TPM (Total Productive Maintenance)

• The concept TPM, the rule of TPM, the component of TPM and organization for TPM, TPM small and group activity, implementation and developing TPM.

 

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perawatan mesin pada industri rekayasa.

 

TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team

was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

 

VENUE TRAINING

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION

4 days

 

JADWAL TRAINING 2020

1. 18 Agust 2020-21 Agust 2020
2. 21 Sep 2020-24 Sep 2020
3. 19 Okt 2020-22 Okt 2020
4. 16 Nop 2020-19 Nop 2020
5. 21 Des 2020-24 Des 2020

 

INVESTATION PRICE/PERSON

1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

MAINTENANCE MANAGEMENT

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days