MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
Yogyakarta | 21 – 23 Mei 2019 | Rp. 6.000.000 Per Peserta
Yogyakarta | 25 – 27 Juni 2019 | Rp. 6.000.000 Per Peserta
Yogyakarta | 23 – 25 Juli 2019 | Rp. 6.000.000 Per Peserta
Yogyakarta | 20 – 22 Agustus 2019 | Rp. 6.000.000 Per Peserta
Jadwal Training 2019 Selanjutnya …
DESKRIPSI MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
Electric Motor technical course will discuss application and installation issues related to motors, variable frequency drives and related automation products in three important sessions. The course will conclude with an operating demonstration that will illustrate the three types of equipment tied together into one system via communication cabling, as well as over air via radio transmission.
The Motors, Drives and Automation Systems course will provide the delegates with a solid base of Motor, Drive and Automation theory. The course will also make delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment. The material handouts will cover a wide range starting from the basics and moving on to more complex issues.
- Application issues
- Speed range
- Torque Capability
- Min Speed
- Max Speed
- Reversing
- Stopping/Braking
OBJECTIVE MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
- Learn the Fundamentals of motors, drives and automation systems
- Update Yourself on the Latest Advancements in VFDs
- Learn the Latest Improvements in Motor Efficiency
- Practical Approaches and Problem-Solving Solutions
- Learn How to Solve Common Motor and VFD Problems
- Learn Practical Troubleshooting Techniques
- Learn the Automation Considerations Between Motors, Drives and PLCs
- Reduce Reliance on Outside Service Companies
- Make Sure Your Equipment is Up and Running
MATERI TRAINING MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
Session One: Electric Motors
- Electromagnetism
- Developing a Rotating Magnetic Field
- NEMA Rotor Characteristics
- Motor Specifications
- NEMA and IEEE standards
- Enclosures
- MG! Part 30 and Part 31 differences
- Impregnation Systems
- Stator Failures and preventative measures
- AC Rotor Construction
- Rotor Failures
- Enclosures, Frames & Cooling
- Bearings
- Bearing Failures
- Insulation Classes
- General Motor Testing Methods
- Motor Overhauls
- Motor Rewinds
- On-line Condition Monitoring
- Information Management for Decision-making
- Qualifying Repair Facilities
Session Two: AC Drives
- VFD Overview
- Voltage And Frequency
- Basic AC Drive
- Constant Torque Applications
- Variable Torque Applications
- Constant Horsepower Applications
- Multi-motor Applications
- Input Filtering requirements
– Line transients
– Power Factor
– Harmonic mitigation - VFD Demonstration
- Output Filtering Requirements
– Long Cable runs
– dv/dt voltage rise
– Peak voltage
– Bearing Currents
Session Three: Human Machine Interface and Automation Considerations
- Introduction
- PLCs
- Number Systems
- Terminology
- Basic Requirements
- Connecting External Device
- Programming A PLC
– Ladder Logic
– Statement List
– Function Blocks - Discrete Inputs/Outputs
- Analog Inputs and Outputs
- High-Speed Instructions
- Communications
- Network Communications
– ASI
– Data Highway
– Profibus
– Device net
– TCIP - Demonstration
PESERTA TRAINING MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
Who Should Attend:
- Industrial, Commercial, Institutional Electrical Engineering & Maintenance Technicians
- Electric Motor Operations staff
- Other electrical personnel involved in the operation and control of electric motors.
METODE TRAINING MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
- Lecture
- Discussion
- Simulation
- Animation
- Video
- Evaluation
INSTRUKTUR TRAINING MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
- Tugino, S.T., M.T.
- Miftakhul Hudha, S.T., M.Eng.Sc.
(Expert in mechanical dan electrical engineering)
- Batch 5: 21 – 23 Mei 2019
- Batch 6: 25 – 27 Juni 2019
- Batch 7: 23 – 25 Juli 2019
- Batch 8: 20 – 22 Agustus 2019
- Batch 9: 03 – 05 September 2019
- Batch 10: 22 – 24 Oktober 2019
- Batch 11: 26 – 28 November 2019
- Batch 12: 10 – 12 Desember 2019
- 08.00 – 16.00 WIB
Yogyakarta: Cavinton Hotel Yogyakarta ; Neo Malioboro Hotel Yogyakarta Ibis Styles Hotel Yogyakarta
Surabaya: Hotel Santika Pandegiling Surabaya
Malang: Best Western OJ Hotel Malang ; Harris Hotel & Convention Malang
Jakarta: Dreamtel Jakarta Hotel ; Ibis Jakarta Tamarin Hotel
Bandung: Golden Flower Hotel Bandung ; Serela Merdeka Hotel Bandung
Bali: Ibis Bali Kuta Hotel ; Harris Kuta Raya Hotel Bali
In House Training : Depend on request
BIAYA TRAINING MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
- 6.000.000 IDR / participant (for public training in Yogyakarta) -> minimum quota of 2 participants
- 7.000.000 IDR / participant (for public training in Bandung, Jakarta, Surabaya) -> minimum quota of 3 participants
- 8.000.000 IDR / participant (for public training in Bali) -> minimum quota of 3 participants
FASILITAS TRAINING MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
INCLUDE:
- Meeting Room at Hotel, Coffe Break, Lunch
- Module (hard & soft copy/flashdish)
- Training Kit, Souvenir, Sertifikat
- Airport pick up services
- Transportation during training
EXCLUDE:
- Penginapan peserta training
- Pajak (Ppn 10 %)