OIL AND WATER HANDLING FACILITIES

OIL AND WATER HANDLING FACILITIES

Yogyakarta | 20 – 23 Oktober 2020 | Rp 8.500.000/ peserta
Yogyakarta | 17 – 20 November 2020 | Rp 8.500.000/ peserta
Yogyakarta | 15 – 18 Desember 2020 | Rp 8.500.000/ peserta

 

OIL AND WATER HANDLING FACILITIES TRAINING OBJECTIVES

After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

 

OIL AND WATER HANDLING FACILITIES TRAINING MATERIAL OUTLINE

Oil Handling Facilities

  • Oil Well Surface Production Equipment and Operation
  1. Oil Well Equipment
  2. Oil Well Production Operation
  3. Well Automatic Safety Device
  • Oil Gathering System. Manifold and Flowline
  1. Oil Gathering System
  2. Manifold System
  3. Flow line Sizing and Design
  • Crude Oil and Gas Separation
  1. Separator and Principle of Separation
  2. Design of Separator
  3. Oil Dehydration

Water Handling Facilities

  • The Chemistry of Water
  1. Chemical and Physical Properties
  2. Water Sampling Procedures
  3. Quantitative Analysis of Oilfield Waters
  4. Water Analysis Techniques
  • Water Formed Scales
  1. Why Scales Form
  2. Predicting Scale Formation
  3. Mixing Waters – Compatibility
  4. Preventing Scale Formation
  5. Scale Removal Methods
  • Corrosion in Water Injection System and Disposal System
  1. Theory of Corrosion
  2. The Effect of Metal Composition
  3. Effect of Water Composition
  4. Forms of Corrosion
  5. Corrosion Control Methods
  6. Corrosion Inhibitors
  7. Internal Coatings and Linings for Tubular Goods
  8. Internal Tank Coatings and Cathodic Protection
  9. Removal of Corrosive Gases from Water
  10. Oxygen Removal
  11. Removal of Hydrogen Sulfide from Water
  12. Removal of Carbon Dioxide from Water
  13. Design to Minimize Corrosion
  14. Corrosion Monitoring Techniques

 

WHO SHOULD ATTEND?

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

 

INSTRUCTOR OIL AND WATER HANDLING FACILITIES

Ir. M. Syahri, MT, Ph.Dand Team

Ir. M. Syahri, MT, Ph.D  is alumnus from UPN “Veteran” Yogyakarta (UPNYK) and Institute of Technology (ITB) department of Chemical Engineering. Also alumnus from University Kebangsaan Malaysia (UKM) department Mechanical and Material Engineering. He has been as researcher at Oil and Gas; Renewable Energy Laboratory UPNYK, he is also being as Senior Surface Facility Engineer in some project and Training Instructor. Some projects have been handled by him such as Senior Surface Facility Engineer, Plant of Development TAC Ramba-Pertamina Field, Sumbagsel (2008); Plant of Further Development East Pamanukan Field, Pertamina DOH Cirebon – Rainbow Emerald (2007); Plant of Further Development Nglobo Field, Pertamina DOH JBT – Cepu (2005); Plant of Further Development Ketaling Barat Field, Pertamina DOH Sumbagteng – Jambi (2005); Also as Reviewer Team BP MIGAS, East Kalimantan Gas Deliverability (Vico, Chevron, TOTAL) (2007).He also gave many courses to the companies, such as: Basic Ammonia Storage, Transfer Equipment and Major Hazards Impact; Dehydration Process (Oil and Gas Operation); Clean Water Processing & Treatment for Industrial Application; Principle of Chemical Process Industry for non Engineer; Boiler Feed Water Treatment & Trouble shooting; Hazarous Materials Safe Handling;Basic Principle For steam Reformer, Shift Reaction, Operability Problem & trouble shooting; CO2 Removal Technology (Absorber, Striper) Trouble shooting and Operability impact; Catalitic Reactor in Ammonia Industry (Desulfurizer, Methanator, Steam Reformer, Ammonia Converter); Basic Fundamental Ammonia Synthesis, ARU And Process in Middle End Area; Inspection of Insulated Pipes Defects and Repairs Techniques; Emergency Handling in Ammonia Industry; etc.

 

OIL AND WATER HANDLING FACILITIES TRAINING VENUE

Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

 

OIL AND WATER HANDLING FACILITIES TRAINING DURATION

4 days

 

JADWAL TRAINING

  1. 20 Okt 2020-23 Okt 2020
  2. 17 Nop 2020-20 Nop 2020
  3. 15 Des 2020-18 Des 2020

 

OIL AND WATER HANDLING FACILITIES TRAINING INVESTMENT PRICE/PERSON

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

OIL AND WATER HANDLING FACILITIES

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days