PNEUMATIC CONVEYING

Training ini membantu merancang, mengevaluasi dan memperbaiki sistem pneumatik yang beroperasi dengan buruk

Yogyakarta | 11 – 13 Agustus 2020 | Rp 6.500.000 per peserta
Yogyakarta | 08 – 10 September 2020 | Rp 6.500.000 per peserta
Yogyakarta | 20 – 22 Oktober 2020 | Rp 6.500.000 per peserta
Yogyakarta | 24 – 26 November 2020 | Rp 6.500.000 per peserta

Jadwal Training 2020 Selanjutnya …

 

 

OVERVIEW TRAINING PNEUMATIC CONVEYING

In this course, a review of gas/solids flow fundamentals is presented, including common pneumatic conveying problems, modes of transport in a pipeline, and how scale-model tests can be used to effectively design or evaluate systems that are operating poorly. Conveying line solids feeders are reviewed, as well as a discussion of proven pipeline layout rules and elbow/bend selection criteria.

One of the most important material-handling techniques in the chemical industry , cement Factory, Fertilizer Factories, Flour Mill  are the movement of material suspended in a stream of air over horizontal and vertical distances ranging from a few to several hundred feet. Materials ranging from fine powders through 6.35-mm, (d-in) pellets and bulk densities of 16 to more than 3200 kg/m3  (1 to more than 200 lb/ft3) can be handled.

 

OBJECTIVES TRAINING PNEUMATIC CONVEYING

  • Understand the advantages of pneumatic conveying systems over mechanical conveying
  • Understand the characteristics, limitations and fundamental design differences of dilute phase, dense phase and air activated gravity conveying
  • Understand the design approach and typical specifications of positive pressure, vacuum and combination pull-push dilute phase conveying systems
  • Understand the factors influencing the performance of pneumatic conveying systems and learn how conveying rates are affected by distances
  • Understand the terms “saltation” and “choking” as applicable to pneumatic systems
  • Learn by example – the methodology for selection of prime mover for a dilute phase pneumatic conveying systems
  • Gain understanding of pneumatic conveying system components such as fans, airlocks, separators, piping and filters
  • Learn how to estimate pressure drop in dilute phase conveying system

 

COURSE CONTENTS TRAINING PNEUMATIC CONVEYING

  • Flow patterns in bins and hoppers; bulk solids flow testing
  • Flow properties and hopper design/troubleshooting
  • Bulk solid feeders – screws, belts, rotary valves
  • Fine powder handling phenomena
  • Review of flow properties test report; silo design example
  • Common segregation mechanisms for powders and solids
  • Flow aid devices; transfer chute design
  • Introduction, modes of conveying; types of systems
  • Fundamentals of gas/solids flow; pressure loss calculations
  • Component selection and system design
  • Dense phase conveying; system troubleshooting

 

INSTRUCTOR TRAINING PNEUMATIC CONVEYING

  • Teguh Pudji Purwanto, MT.
  • Sigit Budi Hartono, ST., MT.

(Expert in mechanical engineering)

 

METHODS TRAINING PNEUMATIC CONVEYING

  • Lecturing
  • Discussion/Sharing
  • Case Study
  • Simulation
  • Evaluation

 

WHO SHOULD ATTEND:

This training is recommended to be followed by the Operator, Supervisor, Technician, Engineer, etc.

 

JADWAL TRAINING 2020

  • Batch 8 : 11 – 13 Agustus 2020
  • Batch 9 : 08 – 10 September 2020
  • Batch 10 : 20 – 22 Oktober 2020
  • Batch 11 : 24 – 26 November 2020
  • Batch 12 : 15 – 17 Desember 2020
  • 08.00 – 16.00 WIB

Yogyakarta: Cavinton Hotel Yogyakarta; Neo + Awana Hotel Yogyakarta; Pesonna Malioboro Hotel Yogyakarta
Surabaya: Hotel Neo Gubeng Surabaya; Hotel Santika Pandegiling Surabaya
Malang: Ibis Styles Malang Hotel
Jakarta: Yello Hotel Manggarai Jakarta; Dreamtel Jakarta Hotel
Bandung: Serela Cihampelas Hotel Bandung; Grand Setiabudi Hotel Bandung; Grand Tebu Hotel Bandung
Bali: Ibis Bali Kuta Hotel; Hotel Neo + Kuta Legian Bali

In House Training : Depend on request

 

TUITION FEE TRAINING

Yogyakarta:

  • Publish Rate       : Rp 6.500.000,- / participant
  • Special Rate        : Rp 6.100.000,- / participant (min 4 participants from the same company)

Bandung/ Jakarta/ Surabaya/ Malang:

  • Publish Rate       : Rp 7.000.000,- / participant

Bali:

  • Publish Rate       : Rp 8.000.000,- / participant

 

FASILITAS TRAINING

INCLUDE:

  • Meeting Room at hotel, Coffe Break, Lunch
  • Module (hard & soft copy/flashdish)
  • Training Kit, Souvenir, Sertifikat
  • Airport pick up services
  • Transportation during training

EXCLUDE:

  • Penginapan peserta training
  • Pajak (Ppn 10 %)

 

PNEUMATIC CONVEYING

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days