Power Generators and Voltage Regulators
Dafam Fortuna Hotel, Yogyakarta | 07 – 10 November 2016 | IDR 7,000,000
DESCRIPTION
This technical course includes a detailed study of power generators and voltage regulators, and the interaction between the two. The course also provides a solid understanding of generator paralleling, VAR flows, and generator/regulator response to changing loads and system voltages. A good working knowledge of polyphase AC theory is recommended as a prerequisite; however, a refresher of the important fundamentals is presented at the beginning of the course.
OBJECTIVE
- Identify the peak and effective AC voltage values on a waveform
- Describe the fundamental operations of a generator
- Describe how generators operate in parallel
- Describe the operating principle of differential protection
WHO SHOULD ATTEND
This course is recommended for maintenance technicians, field engineers, and operators who are required to work with fixed plant generation equipment.
SUMMARY OUTLINE
I. Fundamentals of AC Power
- AC waveforms
- AC phase relationships
- Resistance in AC circuits
- Capacitance in AC circuits
- Power in AC circuits
II. Semiconductor Fundamentals
- Atomic review
- Semiconductor conduction
- Extrinsic semiconductors
- Diodes
- Transistors
- Silicon controlled rectifiers
- Thyrite
- Logic review
- Operational amplifiers
III. AC Synchronous Generators
- Voltage regulator function
- Voltage regulator components
- Voltage regulator operation
- Auxiliary regulator functions
- Voltage regulator troubleshooting
IV. Voltage Regulators/Exciters
- Voltage regulator function
- Voltage regulator components
- Voltage regulator operation
- Auxiliary regulator functions
- Voltage regulator troubleshooting
V. Generator Protection
- Short circuit protection
- Ground fault protection
- Overload protection
- Thermal protection
- Overspeed protection
- Low field excitation or loss of field excitation protection
- Generator motoring protection
- Protection against unbalanced faults
- Overexcitation protection
Trainer
Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.
COURSE METHODE
- Presentation
- Discuss
- Case Study
- Evaluation
- Simulation
TIME & VENUE
- Dafam Fortuna Hotel, Jl. Dagen 60 Malioboro Yogyakarta
- 7-10 November 2016
- 4 days (08 am – 04 pm)
COURSE FEE
IDR 7.000,000.00 per participant non residential
FACILITY
- Module / Handout
- Certificate
- Souvenir
- Training Kit