Programmable Logic Controller Using Siemens S7- 400

Jadwal Training 2013 Selanjutnya …

Objective

PLC Training is designed to instruct electrical control professionals on how to successfully integrate a PLC into actual day-to-day industial electrical processes. It not only deals with the hardware and software, but all the surrounding systems that must be compatible to achieve a safe and reliable control system.
PLC Training is also designed to help delegates keep abreast of the latest Siemens’s PLC technologies and techniques available in this area, this tutorial offers an excellent opportunity for delegates to ask specific questions and exchange ideas relating to their own applications.

Course Content

Introduction
This section will begin with a discussion of basic theory of operation and how it is used to control a process. It will also identify potential applications and relate how PLC control compares with traditional methods of control. A discussion of the benefits of PLC control will follow.

Hardware Configuration
This section will describe the various components used in the formulation of a PLC control system for Siemens S7-400. Included will be methods to select the correct features and capabilities to match the process requirements.

CPU sizes and types
Backplanes
Power supplies
I/O module types

Installation and Wiring Considerations
There are necessary steps that must be taken to ensure that the control system will be correctly installed to provide safe and reliable operation. Installation recommendations and techniques will be given for the following:

Power and grounding
Enclosures
Input devices and wiring methods
Output devices and wiring methods

Commissioning
This section will discuss the methods used and preparations that should be made to guarantee a smooth and troublefree system start-up.

Safety Issues and Techniques
This section will define the major safety issues relating to control systems. A number of techniques will be discussed to address these issues including:

Solid state switching
E-Stops
Power-up delays
Equipment re-starting
Watchdog circuits
MCR circuits

PLC Numbering Systems
PLC control system hardware and software use alternate numbering systems. The delegate will be exposed to the different base systems and how to convert to and from the decimal format.

Programming Siemens S7-400
The delegates will be instructed in the commands and logic necessary to assemble a basic PLC program to control an industrial process. The delegate will perform a simple programming exercise. Interactive Discussion
This will be an opportunity for delegates to interact and trade relevant stories and experiences.

Programming Software
Various types of programming software will be introduced to the delegates. Techniques for simple program development and downloading will be demonstrated. Topics will include:

Program functions
Program keying and development
Connecting to the PLC
Set-up
Program downloading
Monitoring and diagnostics

Hardware will be available so that the delegate can get some hands on experience programming and downloading.

Structured Programming
The concept of structured and block programming will be explained. Methods and techniques will be described which can be used to organize and standardize PLC programs so that they can be easily understood.

Documentation Strategies
The various types of documentation required for effective installation, maintenance, and troubleshooting will be reviewed.

Programmable Logic Controller Troubleshooting
Troubleshooting a Programmable Logic Controller-based control system has its challenges and advantages. The necessary tools and techniques required to perform this will be covered. The use of programming software to monitor and diagnose process and hardware problems will be demonstrated.

Operator Interfaces
The various types of operator interfaces and how they can be used to enhance the control and diagnostic abilities of the Programmable Logic Controller will be discussed.

Data Acquisition
Methods of collecting and storing process data using the PLC s7-400 and peripheral computer stations will be described. Advanced data representation, graphics, and calculations using the computer to enhance the adaptive control capability of the Programmable Logic Controller based system will also be covered

Who Should Attend

PLC Engineering and design personnel
Maintenance and technical services personnel
Process and operations personnel
Technical and process managers
Engineering and design personnel
Electrical consulting engineers
Electrical contractors

Trainer
Ir. Edwin Ardiasya & Team
Expert in Motors, Drives, Automation using DCS & PLC
System Integrator Siemens.

Waktu dan Tempat

25 s.d 27 Juni 2013
20 s.d 22 Agustus 2013
27 s.d 29 Agustus 2013
3 s.d 5 September 2013
24 s.d 26 September 2013
1 s.d 3 Oktober 2013
8 s.d 10 Oktober 2013
12 s.d 14 November 2013
26 s.d 28 November 2013
3 s.d 5 Desember 2013
10 s.d 12 Desember 2013
17 s.d 19 Desember 2013
Hotel Ibis Malioboro Yogyakarta

Request for Training Venue: Semarang, Solo, Bandung, Jakarta, Balikpapan, Surabaya, Bali, Lombok and Batam

Investasi

Rp. 7.500.000,-/participant (non residential) Min. 2 Peserta

Fasilitas

Module / Handout
Sertifikat
Souvenir
Training Kit

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me
Isikan angka/huruf pada gambar

cforms contact form by delicious:days

Related Training: