SAFETY INSTRUMENTED SYSTEMS (SIS): ISA, IEC – Almost Running

SAFETY INSTRUMENTED SYSTEMS (SIS): ISA, IEC

Bandung | 16 – 19 Juli 2019 | Rp 8.750.000/ peserta – ALMOST RUNNING
Bandung | 23 – 26 Agustus 2019 | Rp 8.750.000/ peserta
Bandung | 15 – 18 September 2019 | Rp 8.750.000/ peserta
Bandung | 15 – 18 Oktober 2019 | Rp 8.750.000/ peserta

Jadwal Training 2019 Selanjutnya …

 

 

TRAINING INTRODUCTION

Most of today’s computer controlled industrial processes involve large amounts of energy and have the potential for devastating accidents. Reliable, well-engineered safety systems are essential for protection against destruction and loss of life. This course  is an intensive practical and valuable exposure to the most vital, up-to-date information and practical know-how to enable you to participate in hazard studies and specify, design, install and operate the safety and emergency shutdown systems in your plant, using international safety practices. This course will provide you with a broad understanding of the latest safety instrumentation practices and their applications to functional safety in manufacturing and process industries. This course could save your business a fortune in possible downtime and financial loss.  The objectives of the course are to:

1. Expand your practical knowledge in the application of safety instrumented systems (SIS) as applied to industrial processes
2. Provide you with the knowledge of the latest standards dealing with each stage o the safety life cycle from the initial evaluation of hazards to the detailed engineering and maintenance of safety instrumented systems (SIS)
3. Give you the ability to plan hazard and risk assessment studies, then design, implement and maintain the safety systems to ensure high reliability
4. Assist your company to implement functional safety measures to international standards

Although a basic understanding of electrical engineering principles is essential, even those with a superficial knowledge will substantially benefit by attending this course. In particular, if you work in any of the following areas, you will benefit: Instrumentation and control engineers and technicians, Design, installation and maintenance engineers and technicians in the process industries, Managers and sales professionals employed by end users, Systems integrators or consultants, Consulting electrical engineers, Plant engineers and instrument technicians, Operations technicians, Electrical maintenance technicians and supervisors, Instrumentation and control system engineers, Process control engineers, Mechanical engineers

SAFETY INSTRUMENTED SYSTEMS TRAINING OUTLINE

1. Introduction to safety instrumented systems (SIS)
2. Definitions, Overview, Standards
3. IEC 61508, IEC 61511 and ISA S84
4. Hazards and Risk Reduction
5. Hazard Studies
6. Layers of Protection Analysis (LOPA)
7. Safety Requirements Specifications
8. Safety Integrity Level (SIL)
9. Technology Choices
10.  Conceptual Design
11. Reliability Analysis
12.  Safety in Field Instruments and Devices
13. Engineering the Safety Systems Hardware
14.  Engineering the Application Software
15. Overall Planning
16.  Installation and Commissioning
17. Validation and Operation
18.  Management of Change
19.  Justification of safety instrumented systems (SIS)

 

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE

1. Study case or YOKOGAWA PROSAFE RS

 

INSTRUCTOR

Ir.Endra Joelianto, Ph.D

Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.  He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia,

VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION

4 days

 

JADWAL TRAINING 2019

• 16 Jul 2019-19 Jul 2019
• 26 Agust 2019-29 Agust 2019
• 23 Sep 2019-26 Sep 2019
• 15 Okt 2019-18 Okt 2019
• 25 Nop 2019-28 Nop 2019
• 10 Des 2019-13 Des 2019

 

INVESTATION PRICE/ PERSON 

1. Rp 8.750.000/ person (full fare) or
2. Rp 8.500.000/ person (early bird, payment 1 week before training) or
3. Rp 8.250.000/ person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS

•     Training Module
•     Flashdisk contain training material
•     Certificate
•     NoteBook and Ballpoint
•     T-Shirt
•     Backpack
•     Training Foto
•     Training room with full ac facilities and multimedia
•     Lunch and twice coffee break everyday of training safety instrumented systems (SIS)
•     Qualified Instructor
•     Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days