Principles, hardware system, operation & programming of Supervisory control and data acquisition
Bandung | 21 – 24 September 2020 | Rp 8.500.000/ peserta
Bandung | 12 – 15 Oktober 2020 | Rp 8.500.000/ peserta
Bandung | 09 – 12 November 2020 | Rp 8.500.000/ peserta
Jadwal Training 2020 Selanjutnya …
TRAINING INTRODUCTION
SCADA has traditionally meant a window into the process of a plant and / or a method of gathering of data from devices in the field. Today, the focus is on integrating this process data into the actual business, and using it in real time. In addition to this, today’s emphasis is on using Open Standards, such as communication protocols (eg IEC 60870, DNP3 and TCP/IP) and ‘off-the-shelf’ hardware and software, as well as focusing on keeping the costs down. PLCs continue to gain in popularity. In fact, many SCADA applications use PLCs as the RTU of choice, when communicating with field devices. This comprehensive course covers the essentials of SCADA and PLC systems, which are often used in close association with each other.
TRAINING OBJECTIVE
After completing this course, the participants should be able to understand the concepts of SCADA Systems, build and configure the MTU and RTU modules, program the MTU and RTU, use sequential and PID controller implementation of MTU and RTU. Input/Output communication to get RTU data, set up polling and exception report of MTU/RTU, link the TU/RTU with Supervisory Computer and use Human Machine Interface (HMI) to optimize the operation of SCADA System.
SCADA TRAINING OUTLINE
- Concept of SCADA System
- Software and Hardware of SCADA System
- MTU/RTU Configuration Set-up
- MTU/RTU Communication
- MTU/RTU Ladder Logic Programming
- Logic and Sequential Programming
- MTU/RTU PID controller Programming
- MTU/RTU Data Logging
- MTU/RTU Exception Reporting
- MTU/RTU System Redundancy
- Input/Output Server and HMI System
- HMI Operation and Programming
- Comprehensive Practice
SCADA TRAINING METHODES
- Tutorial
- Discussion
- Practice
FACILITIES USED
- PLC
- Software and Hardware of SCADA System
- Miniature Plan
- HMI Panel
- MTU/RTU
TRAINING INSTRUCTOR
H. MH Sapto Widodo, M.Sc. and Hadi Prasetyo, MT
H. MH Sapto Widodo, M.Sc was born in June 9th 1957. He got his education of master of science in electrical engineering, System Design and Technology, Fachhochschule Darmstadt, Germany. He also has followed some courses for improving his competencies in Indonesia and abroad. He is head of electrical department at P4TK BMTI Bandung atau TEDC Bandung(technical education development center) and he also as lecturer at the department. He has experiences in some consultants. Some training sectors related to his fields are as follows Electrical & Mechatronic, including these related fields: Electrical
VENUE
Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll
TRAINING DURATION
4 days
- 21 Sep 2020-24 Sep 2020
- 12 Okt 2020-15 Okt 2020
- 09 Nop 2020-12 Nop 2020
- 21 Des 2020-24 Des 2020
INVESTATION PRICE/PERSON
- Rp 8.500.000/person (full fare) or
- Rp 8.250.000/person (early bird, payment 1 week before training) or
- Rp 7.950.000/person (if there are 3 or more participants from the same company)
FACILITIES FOR PARTICIPANTS :
- SCADA Training Module
- Flashdisk contain training material
- Certificate
- NoteBook and Ballpoint
- T-Shirt
- Backpack
- Training Foto
- Training room with full ac facilities and multimedia
- Lunch and twice coffee break everyday of SCADA training
- Qualified Instructor
- Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )
SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING