SUPERVISORY CONTROL AND DATA ACQUISITION SYSTEM (SCADA) & PLC – Pasti Jalan

SUPERVISORY CONTROL AND DATA ACQUISITION SYSTEM (SCADA) & PLC

Yogyakarta | 17 – 21 Oktober 2016 | Rp 9.500.000/person

 

 

TUJUAN TRAINING SCADA & PLC

Setelah selesai mengikuti kursus ini, peserta diharapkan akan mengerti dan memahami pengoperasian dan pengendalian SCADA system dalam penerapan aplikasinya di industri migas ataupun di industri lainnya. Peserta akan memahami dari prinsip-prinsip, prinsip kerja, komunikasi, hardware-hardware yang digunakan sampai kepada aplikasinya dalam banyak bidang seperti electrical power distribution dan migas serta industry lainnya.

Kursus ini juga memberikan pemahaman terhadap PLC, kuncinya pada pengertian dasar PLC : Pemrograman AND / OR, batch programming techniques, PLC program scan cycle, program documentation, hardware considerations, diagnostic, troubleshooting dll.

 

CAKUPAN MATERI TRAINING SCADA:

1. Definition of terms.
2. Introduction to SCADA and how it works.
3. Communication requirement.
4. Remote terminal unit (RTU).
5. Field Devices and wiring methods.
6. Data communication/networking.
7. Master terminal unit and configuration.
8. Applications in electric power distribution.
9. Application in oil & gas production & distribution
10. Application in other industries.

CAKUPAN MATERI TRAINING PLC:

1. Brief history of PLC’s.
2. Relay vs PLC’s.
3. PLC function and possibilities.
4. PLC I/O addressing.
5. AND/OR programming.
6. Examination ON and Examine OFF statesments.
7. Sealing bits / latch programming.
8. Program scan cycle.
9. Ladder logic programming.
10. Batch programming.
11. Common problems bugs.
12. Safety considerations.
13. Programming counters.
14. Programming timers.
15. Numerical operations.
16. Comparison statements.
17. Latch / Unlatch statements.
18. Advanced programming statements.
19. Hardware modules & accessories.
20. PLC installation & hookups.
21. Diagnostics and troubleshooting.
22. Emerging trends and capabilities.

 

SIAPA SEBAIKNYA MENGIKUTI TRAINING SCADA & PLC INI?:

1. SLTA/D3 dengan pengalaman kerja minimal 3 tahun dengan bidang disain, control dan automation technology dari industri seperti misalnya pembangkit listrik, petrokimia dan pupuk, semen, perminyakan, manufaktur dan sebagainya sebagai tenaga operator.
2. Semua pihak yang ingin memahami topik ini

INSTRUCTOR TRAINING SCADA & PLC

Tugino, ST.,MT. dan Tim

Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon, PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.

VENUE SCADA & PLC

Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

 

TRAINING DURATION SCADA & PLC

5 days

TRAINING TIME SCADA & PLC

17 – 21  Oktober 2016

INVESTMENT PRICE/PERSON :

1. Rp. 9.500.000/person (full fare) or
2. Rp. 9.250.000/person (early bird, payment 1 week before training) or
3. Rp. 9.000.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS :

1. Modul Training
2. Flashdisk Training berisi materi training
3. Sertifikat
4. ATK: NoteBook dan Ballpoint
5. T-Shirt
6. Ransel
7. Foto Training
8. Ruang Training dengan fasilitas Full AC dan multimedia
9. Makan siang dan 2 kali coffeebreak
10. Instruktur yang Qualified
11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days