SYSTEM AND COST PRODUCTION
Bandung | 27 – 30 Januari 2015 | Rp 7.950.000,-/peserta
Bandung | 02 – 05 Februari 2015 | Rp 7.950.000,-/peserta
Bandung | 24 – 27 Maret 2015 | Rp 7.950.000,-/peserta
Bandung | 06 – 09 April 2015 | Rp 7.950.000,-/peserta
Bandung | 04 – 07 May 2015 | Rp 7.950.000,-/peserta
Jadwal Training 2015 Selanjutnya …
LATAR BELAKANG :
Sistem produksi pada saat ini dan di masa mendatang memegang peranan penting dalam melakukan proses produksi, karena merupakan metoda berproduksi yang akan menentukan keberhasilan dalam memenuhi tuntutan pasar industri. Dalam perkembangannya, sistem produksi banyak berkaitan dengan bidang lain seperti teknik produksi, komputasi, dan teknik pemrosesan informasi (information processing technology).
Penentuan kondisi pemotongan proses pemesinan yang paling baik atau optimum dalam pembuatan produk atau komponen mesin dan peralatan tidak hanya berkaitan dengan faktor teknologi proses saja, melainkan berkaitan pula dengan faktor ongkos dan mungkin juga dengan faktor lain seperti kecepatan produksi demi untuk memenuhi target atau pesanan ataupun untuk mencapai keuntungan secepat mungkin.
Dengan demikian, untuk perencanaan kondisi proses perlu ditunjang dengan data mengenai ongkos produksi, ongkos pahat, ongkos operasi, dan data pemesinan yang lengkap yang biasanya tidak diketahui oleh seorang operator mesin. Hal ini sesungguhnya memang merupakan tugas bagi seorang ahli teknik produksi yang menguasai teori, memiliki data, dan pengalaman yang memungkinkan dalam penentuan kondisi proses pemesinan sesuai dengan tujuan dengan sebaik mungkin atau optimum.
Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Sistem dan Ongkos Produksi (System and Cost Production).
SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang sistem dan ongkos produksi pada industri rekayasa.
TUJUAN TRAINING :
Setelah mengikuti Pelatihan ini para peserta diharapkan akan memiliki pemahaman lebih tentang pengetahuan sistem dan ongkos produksi.
CAKUPAN MATERI TRAINING :
1. Pengenalan atas sistem produksi yang diterapkan.
2. Sistem dengan berbagai jenis basis data
- basis data teknik (geometrik, NC program, dokumen teknik, manual, standar, pengetesan, pengukuran),
- basis data logistik (jadwal, daftar komponen/material, volume produksi, routing),
- basis data administratif (ongkos, waktu, efisiensi sistem, kerusakan/kendala).
3. Pengenalan teknik manajemen produksi
- penjadwalan, line balancing, ordering system, decision support system.
4. Struktur penghitungan ongkos
- struktur akuntansi perusahaan, cara penetapan depresiasi, bunga dan pajak.
5. Beban ongkos yang ditanggung oleh unit produksi (mesin & operator)
- ongkos langsung & tak langsung, sumber beban ongkos dan cara pembagian penanggungan ongkos pada bagian produksi s.d unit produksi.
6. Teknik penentuan menit kerja per unit produksi
- work sampling untuk menetapkan efektivitas unit kerja.
7. Penetapan ongkos operasi (Rp/menit), ongkos pahat, ongkos penyiapan produksi (pemrograman, jigs & fixtures, settings, dsb.)
8. Pembuatan, pengelolaan, dan pembaruan (updating) basis data ongkos khususnya bagi bagian pemesinan.
9. Pemakaian software penghitungan ongkos dan pemanfaatan basis data ongkos sesuai dengan standar yang dikembangkan pabrik.
Trainer
SUGENG ISDWIYANUDI, Ir. MT. And Team
was graduated from politeknik universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System. In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.
VENUE :
Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)
TRAINING DURATION :
4 days
TRAINING TIME :
- 27 Jan 2015-30 Jan 2015
- 02 Feb 2015-05 Feb 2015
- 24 Mar 2015-27 Mar 2015
- 06 Apr 2015-09 Apr 2015
- 04 May 2015-07 May 2015
- 22 Jun 2015-25 Jun 2015
- 06 Jul 2015-09 Jul 2015
- 03 Aug 2015-06 Aug 2015
- 29 Sep 2015-02 Oct 2015
- 19 Oct 2015-22 Oct 2015
- 24 Nov 2015-27 Nov 2015
- 14 Dec 2015-17 Dec 2015
INVESTATION PRICE/ PERSON :
- Rp 7.950.000/person (full fare) or
- Rp 7.750.000/person (early bird, payment 1 week before training) or
- Rp 7.500.000/person (if there are 3 or more participants from the same company)
FACILITIES FOR PARTICIPANTS:
- Training Module
- Flash Disk contains training material
- Certificate
- Stationeries: NoteBook and Ballpoint
- T-Shirt
- Backpack
- Training Photo
- Training room with full AC facilities and multimedia
- Lunch and twice coffeebreak everyday of training
- Qualified instructor
- Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)