SYSTEM SAFETY ENGINEERING AND MANAGEMENT

SYSTEM SAFETY ENGINEERING AND MANAGEMENT

Bandung | 14 – 17 Januari 2019 | Rp 8.500.000/ peserta
Bandung | 18 – 21 Februari 2019 | Rp 8.500.000/ peserta
Bandung | 25 – 28 Maret 2019 | Rp 8.500.000/ peserta 
Bandung | 01 – 04 April 2019 | Rp 8.500.000/ peserta

Jadwal Training 2019 Selanjutnya …

 

 

SYSTEM SAFETY ENGINEERING AND MANAGEMENT TRAINING PURPOSE

• The system safety engineering and management  is intended to describe “how” to set up and implement the safety risk management process.
• The system safety engineering and management  establishes a set of consistent and standardized procedures and analytical tools.
• The system safety engineering and management  is intended for use in support of specific system safety program plans.
• The system safety engineering and management  provides guidance on “how” to perform safety risk management, other questions concerning “when, who, and why” should be addressed through the three types of plans discussed in this document: System Safety Management Plan (SSMP), and a System Safety Program Plan (SSPP), and an Integrated System Safety Program Plan (ISSPP).
• The system safety engineering and management  focuses on “how”  to perform safety risk management, while these planning documents describe, the organization’s processes and procedures for implementing system safety.

 

SYSTEM SAFETY ENGINEERING AND MANAGEMENT TRAINING OUTLINE

Principles of System Safety

• Planning principles
• Hazard analysis
• Comparative safety
• Risk management decision making
• Safety order of precedence
• Behavioral-based safety
• Models used by system safety for analysis

Safety Assessments Before Investment Decision

• Safety assessments before investment decision
• Operational safety
• Comparative safety assessment (CSA)

Post-Investment Decision Safety Activities

• Post-investment decision safety activities
• Objectives and requirements
• Preparing a system safety program plan
• System safety program plan contents
• Integrated system safety program plan
• Program balance & interfaces

System Safety Guidelines for Contracting

• contracting principles
• contracting
• evaluating bidding contractors (system safety checklist)
• managing contractor system safety (contract oversight)

Integrated System Hazard Analysis

• Integrated approach
• Risk control
• Use of historical data

Safety Analysis – Hazard Analysis Tasks

• The design process
• Analysis
• Qualitative and quantitative analysis
• Design and pre-design safety
• How to review and/or specify a safety analysis
• Evaluating a preliminary hazard analysis

Analysis Techniques

• Analysis techniques
• Introduction
• Fault hazard analysis
• Fault tree analysis
• Common cause failure analysis

Test and Evaluation Safety

• Tests conducted specifically for safety
• Tests conducted for purposes other than safety
• Test safety analysis
• Other test and evaluation safety considerations

Facilities System Safety

• New facility system safety
• Existing facilities
• Facility system safety program
• Analytical techniques
• Facility risk analysis methodology

Operational Risk Management (ORM)

• Defining risk and risk management
• ORM principles
• The ORM process summary
• Implementing the ORM process

Human Factors Engineering and Safety Principles & Practice

• Human factors process overview
• Managing the human factors program
• Establish human factors requirements
• Conduct human factors integration
• Human factors in system-to-system interfaces
• Human factors engineering and safety guidelines

Successful health and safety Management
Managing health and safety
safety guidance -Notification and marking of sites

 

INSTRUCTOR 

Caecilia Sri Wahyuning S.   and Team

Caecilia Sri Wahyuning S.  Lulusan dari Institut Teknologi Bandung, dan Beliau sekarang sebagai dosen di Teknik Industri Institut Teknologi Nasional Bandung. Selain mengajar sebagai dosen, di Kampusnya Beliau juga pernah menjadi kepala laboratorium perancangan system kerja dan ergonomic dan juga menjadi PIC unit penjaminan mutu institute teknologi nasional dan kepala bagian monitoring dan evaluasi bidang non akademin UPM institute teknologi nasional. Beliau juga memiliki pengalaman riil pengerjaan projek diantaranya Pembuatan Standar Kompetensi bidang Pengelasan, Jasa Konsultansi Sumber Daya Manusia Penyediaan Konsultansi Key Performance Indicator Dalam Rangka Reformasi Birokrasi Departemen Keuangan, Jasa Konsultasi Perizinan & Studi Kelayakan Pendirian SPBU & SPPBE. Beliau terlibat secara aktif di beberapa organisasi di kampus maupun di lingkungan social. Ibu Caecilia Sri Wahyuning S.  Secara aktif melakukan penelitian dan melakukan publikasi karya ilmiah Beliau di dalam dan luar negeri. Ibu Caecilia sudah sering memberikan pelatihan/training kepada perusahaan di Indonesia untuk judul-judul di bidang kompetensi Beliau.

 

VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION 

4 days

 

JADWAL TRAINING 2019

1. 14 Jan 2019-17 Jan 2019
2. 18 Feb 2019-21 Feb 2019
3. 25 Mar 2019-28 Mar 2019
4. 01 Apr 2019-04 Apr 2019
5. 13 Mei 2019-16 Mei 2019
6. 25 Jun 2019-28 Jun 2019
7. 08 Jul 2019-11 Jul 2019
8. 26 Agust 2019-29 Agust 2019
9. 23 Sep 2019-26 Sep 2019
10. 07 Okt 2019-10 Okt 2019
11. 25 Nop 2019-28 Nop 2019
12. 09 Des 2019-12 Des 2019

 

INVESTMENT PRICE/PERSON

1. Rp 8.500.000/person (full fare) or
2. Rp 8.250.000/person (early bird, payment 1 week before training) or
3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days