TEKNOLOGI PERAWATAN MESIN

Training ini memberikan cara instalasi mesin baru, tes penerimaan mesin, perawatan preventif dan rekalibrasi mesin

Bandung | 10 – 13 Agustus 2020 | Rp 8.500.000/ peserta
Bandung | 22 – 25 September 2020 | Rp 8.500.000/ peserta
Bandung | 12 – 15 Oktober 2020 | Rp 8.500.000/ peserta

Jadwal Training 2020 Selanjutnya …

 

 

PENDAHULUAN TRAINING

Sebagai salah satu kinerja perfomansi suatu perusahaan manufaktur moderen saat ini adalah cepat tanggapnya sistem pelaksanaan perawatan yang diakibatkan adanya perubahan dan perkembangan fasilitas pabrik yang dirancang sedemikian rupa kompkleks dengan sasaran untuk menghasilkan produk dengan kualitas tinggi dan cepat. Pada dasarnya perawatan merupakan kombinasi dari semua tindakan teknik dan tindakan administratatif untuk mempertahankan kondisi atau mengembalikan kondisi fungsi komponen.

Setelah mesin dipakai dalam selang waktu tertentu maka keausan yang terjadi karena beberapa faktor  menyebabkan kerusakan komponen-komponen pada mesin perkakas. Misal, deformasi karena gaya pemotongan dapat menimbulkan gejala gerakan yang tersendat-sendat (stick-slip) pada gerakan pindah berbagai komponen, menimbulkan keadaan getaran paksa dan kesalahan dinamik pada konstruksi mesin perkakas.

Bagi perawat mesin perkakas yang tidak tanggap dan tidak ahli, kerusakan yang kecil pun bisa menjadi sumber frustasi dan mungkin pula dapat menambah parahnya kerusakan. Oleh sebab itu, diperlukan tim perawat yang ahli. Tim perawat bisa terlibat pula sewaktu diadakan instalasi mesin baru, tes penerimaan mesin, perawatan preventif dan rekalibrasi mesin.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Teknologi Perawatan Mesin.

 

SIAPA YANG SEBAIKNYA MENGIKUTI TRAINING INI?

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang teknologi perawatan mesin pada industri rekayasa.

 

MANFAAT YANG DIPEROLEH

1. Pemahaman tentang pengetahuan dan teknologi perawatan mesin.
2. Keahlian tentang penanganan terhadap kerusakan komponen mesin, dan inspeksi/monitoring terhadap pelumas dan getaran mesin, serta balancing, alignment dan levelling mesin.

 

MATERI TRAINING TEKNOLOGI PERAWATAN MESIN

1.    Teknik perawatan

• Perawatan terencana
• Perawatan tak terencana
• Perawatan berkala
• Perawatan prediksi

2.    Strategi perawatan mesin

• Tingkat kritis suatu mesin
• Metode monitoring kondisi mesin
• Metode analisis/diagnosis
• Pemilihan metode monitoring

3.    Perawatan komponen mesin
4.    Inspeksi/monitoring pelumas
5.    Inspeksi/monitoring getaran mesin
6.    Balancing, alignment, levelling mesin

 

TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team

was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

 

VENUE TRAINING

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION

4 days

 

JADWAL TRAINING 2020

1. 10 Agust 2020-13 Agust 2020
2. 22 Sep 2020-25 Sep 2020
3. 12 Okt 2020-15 Okt 2020
4. 09 Nop 2020-12 Nop 2020
5. 21 Des 2020-24 Des 2020

 

INVESTATION PRICE/ PERSON

1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

TEKNOLOGI PERAWATAN MESIN

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days